PSC SP400rf manual Set = N One

INTERFACE

RS-232

INTERCHARACTER DELAY

Intercharacter Delay refers to the pause, if any, between each character before it is sent to the host. This time delay is used to control the flow of data from the scanner, but it should not be required for most applications. Use these labels to select the desired Intercharacter Delay.

SET -------------------------------------

	= NONE -----------------------
	= 10 MILLISECONDS ------------
	= 20 MILLISECONDS ------------
DELAY	= 30 MILLISECONDS ------------
INTERCHARACTER	= 40 MILLISECONDS
	= 50 MILLISECONDS ------------
	= 60 MILLISECONDS ------------
	= 70 MILLISECONDS ------------
	= 80 MILLISECONDS ------------

20 SP400RF Programming Guide