Savin F9103, LF310 Reception Modes, Selecting the Reception Mode, Manual Receive, Auto Receive

StellaF1EN-3_FM.book Page 39 Monday, November 12, 2001 11:38 AM

Reception Modes

Reception Modes

The machine can treat incoming fax messages and telephone calls in three ways.

❖Manual Receive

Use this mode if your line is shared by a fax machine and a telephone but you wish to answer all calls yourself and decide whether they are fax documents or telephone

calls. You must manually press the {Start} key to receive a fax.

The machine will ring continuous- ly until you answer the call, so you have to be near the machine at all times.

❖Auto Receive

Use this mode if you have a dedi- cated fax line. The machine as- sumes all calls are fax documents. It will ring once to alert you of an incoming call, and then starts re- ceiving.

❖Auto Select

❒Set a smaller number of rings for the telephone answering machine than for the fax ma- chine.

❒It could not be work correctly depends on a telephone an- swering machine.

Selecting the Reception Mode

Select the Reception Mode using the following procedure.

A Press the {User Tools} key.

2

In this mode, the machine rings a number of times. You can answer the call while the machine is ring- ing. If you do not answer the call, the machine automatically chang- es to receive fax messages.

Note

❒You can change the number of rings. See p.61 “Setting the Auto Ring Time”, <Advanced Fea- tures> .

❒When the other party send a fax message, the machine changes to receive the fax message auto- matically.

❒You can connect a telephone an- swering machine with Auto Se- lect.

B Press 0 or 1 until " 2. Fax Fea- tures " is displayed.

C Press the {OK} key.

39