Uniden UBC3300XLT manual Feature Highlights

Feature Highlights

•Trunk Tracking – Follow VHF High Band UHF 800/900MHz trunked public safety and public service systems just as if conventional two-way communications were used.

•Multi-Track– Track more than one trunking system

at a time. Scan conventional and trunked systems at the same time.

•1000 Channels – Program one frequency into each channel. You must have at least one channel programmed to use the Scan mode.

•22 Bands – Includes 22 bands, with aircraft and 800 MHz.

•10 Banks – 10 banks with 100 channels each are useful for storing similar frequencies to maintain faster scanning cycles or for storing all the frequencies of a trunked system.

•25 MHz-1300 MHz – Indicates the range of frequencies that can be searched within the bands of your scanner.

Note: The frequency coverage is not continuous.

•10 Priority Channels – You can assign one priority channel in each bank. Assigning a priority channel allows you to keep track of activity on your most important channel(s) while monitoring other channels for transmissions. You can also assign Trunking priority Talkgroups.

•Priority Plus Scan – Allows you to scan only priority channels.

•Unique Data Skip – Allows your scanner to skip unwanted data transmissions and reduces birdies.

•Memory Backup – If power is disconnected, the frequencies programmed in your scanner are retained in memory.

•Direct Channel Access – Go directly to any channel without entering the Menu mode.

•Attenuator – Reduces the signal strength on a per frequency basis.

•PC Programmable – Allows you to easily program all frequencies and Trunking Talk Groups into your UBC3300XLT from your PC.

– Remote cable is optional.

•Turbo Search – Increases the search speed to 300 steps per second. This applies only to transmission bands with 5 kHz steps.

9