Uniden UBC3300XLT manual Air Service Search Skip, Press AIR/STEP

Air Service Search

The Air Service Search feature allows you to scroll through the preprogrammed services.

1.Press AIR/STEP.

––– OR –––

Another method is as follows:

To set Air Service Search, enter into the Menu mode.

1. Press MENU/BACK. SERVICE OPTION

2.Select 1:SERVICE OPTION by 1:AIR

rotating the VFO and pressing E. 2:CHAIN SEARCH

3.Select 1:AIR by rotating the VFO and pressing E.

Note: • You can not change such settings as Auto Delay, during an Air Service Search.

•You can enter one of the Air Service Search frequencies into Channel Memory by pressing TRNSFR when holding on one of the frequencies and pressing E.

•When you rotate the VFO while the Air Service Search is active, you can change the search direc- tion to up or down.

To stop the search, press HOLD/MAN. Rotate the VFO to move up or down one programmed frequency or press RSM to resume searching. When the unit is in the air service search, a user can change the frequency step for air band between 12.5kHz and 8.33kHz by pressing the AIR/STEP.

Air Service Search Skip

You can set the scanner to skip the unwanted frequencies during Air Service Search. 100 skipped frequencies are programmable.

1.To skip over a frequency, press L/O when stopping at the frequency you want to skip.

2.To cancel a skip during search, press HOLD/MAN, select the desired frequency by rotating the VFO, then press L/O.

43