Uniden UBC3300XLT manual Setup, Installing the Battery Pack, Charging the Battery Pack

Page 17

Setup

Installing the Battery Pack

1.Open the cover.

2.Connect the battery pack connector observing the correct polarity.

3.Replace the cover and press down until it clicks into place.

Charging the Battery Pack

Use the AC Adapter/Charger to power the UBC3300XLT from an AC outlet.

You can use your scanner while the battery charges. To fully charge the battery, leave the AC Adapter/Charger connected for 14 — 16 hours.

CH/

FRQ

HOLD/		RSM
MAN
SCAN	AIR/STEP	SEARCH
MENU/BACK		TRUNK
MENU/BACK
L/O
REVERSE		SELECT
REVERSE		MUTE

Use only the supplied AC Adapter

Note: Disconnect the AC Adapter/Charger from the unit when charging is complete.

Low Battery Indicator

When the battery pack is low and needs to be charged, appears on the display. You will also hear a beep every 15 seconds as an audible alert.

13

Image 17

Contents Page Page Contents Edacs Scat LTR IntroductionFront View Icon Description Icon DisplayUBC3300XLT Shortcuts Then enter the trunk type you want to track. Press E Important Notice What is Searching? What is Scanning?What is Trunk Tracking? TerminologyPage Feature Highlights Page Information on the Internet Where to Obtain More InformationIncluded with Your Scanner Package Installing the Battery Pack SetupCharging the Battery Pack Low Battery IndicatorFlexible Antenna Connecting the Optional Remote CableBeltclip Listening SafelyTurn the Scanner On Setting the SquelchBasic Operation Understanding the Menu System Menu Description and Numeric Keypad Equivalents Set attenuation for all search ranges. See 2SCAN 2SCAN Option 1CONVENTIONAL 6STEPS You can assign a variety of step sizes to the channel 8I-CALLMOTOROLA/EDACS 0EDACS ID Form Edacs 3SYSTEM Option 1DIMMER Select 2DISABLE in this mode Press MENU/BACK Storing Frequencies into Channels in Menu ModeProgramming Editing a Stored Frequency Deleting a Stored FrequencyDuplicate Frequency Alert 010 512.0000 FMStoring Text Tags Transfer FrequenciesPress HOLD/MAN Assigning a Bank Tag to a Bank Press MENU/BACKAssigning the Beep Alert to a Channel Beep Alert855.0000 Programming Tips Storing Frequencies During Scanning Scanning001 BankSetting the Delay Mode for Frequency RF Attenuation FeatureLockout in Scanning Mode Lockout in Hold Mode Press HOLD/MANChannel Lockout 001 141.5000 FM Uniden Group aPriority Scan Restoring a Locked-out ChannelRestoring All Locked-out Channels 001 512.0000 FM Changing the Priority ChannelPriority Channel Plus Scan Srch 12.5k 1240.0000 FM Range Setting a Search RangeSearching Starting Chain Search Search Hold FeatureData Skip Srch 12.5k 1240.0000 FM Range 25cm Amateur GrpStoring Search Frequencies Frequency Skip12--56 Auto Storing12.5k 001 FM Bank Squelch SQ Mode001 FM DCS Bank 001 512.0000 FM Ctcss 250.3 Bank001 512.0000 FM Bank 003 512.0000 FM Ctcss Uniden Group aAdditional Menu Options for Searching Press AIR/STEP Air Service SearchAir Service Search Skip Service Search AIR 001 0000.0000 Programming Receiving Trunked SystemsSelecting or Changing Trunking System Type LCD display Icon TrunkingType Special requirements Programming Trunking Frequencies010 Programming ID Scan Lists ManuallyE5-0 09-022¡ M5-0 4128 1216¡M5-0 050-2¡ M5-0 02-120¡1216 To enter a LTR IDReceiving Trunked Systems ID Scan 867.9875 FM List ID Scan ModeTrunked Search ID Scan Hold FeatureID Monitor Mode ID Lockout ID Search Hold and Direct Entry ID Hold ModeID4128 867.8375 FMRestoring Locked-out IDs Review ID LockoutLT ID0-02-042 To unlock a single ID, follow these steps Press MENU/BACKReverse Key Setting the Delay Mode for Trunking ModeDeleting a Stored ID Setting Priority in Trunking ModeProgramming Scan Lists During Search Call Motorola/EDACS Moving between Scan List MemoriesMulti-Track Calls in Scan and Hold ModeMulti-Track Operational Details Edacs Tracking Edacs ReceptionSearch An Edacs Trunked systemAFS Partial Entry Feature Special Edacs FeaturesPatch Tracking LTR Tracking LTR ReceptionMotorola Tracking Motorola Reception001 867.8375 FM 1TYPE2 800 2TYPE1 Selecting Preset Fleet MapFleet Map Programming Programming a Hybrid System Programming a Fleet Map001 867.8375 FM 1TYPE2 001 FM Block 0 Size Code50.0 Toggling the Status Bit Control Channel Only ModePage Disconnect Tone Detect Option End Code Remote Interface PC Control ModeTo connect Scanner to PC To program your scannerStart Remote Mode and Change Transfer Speed Clone ModeSpeed 39600 bps 419200 bps PC Control ParameterChanger Cable available at most computer stores To connect the Scanner to ScannerClone Dimmer Additional FeaturesEnter Lock Key LockKey Beep Option Reverse ModeScreen Mask Channel Step SelectionMute On/Off Receiving Mode SelectionFrequency and Channel Tuning with the VFO Control Care and Maintenance Troubleshooting Problem Suggestion Specifications Glossary of Terms Page Page Appendix Preset Fleet MapsSize Code Type I Programming Information User Defined Fleet MapsSize Code Restrictions Fleet Map Size CodesReverse List UBC3300XLT Flow Charts Scan Option Conventional System Option Dimmer Dimmer Light Dimmer Time Screen Mask Declaration of Conformity Memo UBZZ01315AZ