Uniden UBC3300XLT manual Auto Storing, 12.5k, 12--56

2.	Press TRNSFR to store the	SRCH	12.5k
	frequency in the channel you	1240.0000 FM
	selected. The smallest empty	Range 1
	channel number flashes on the	C004	0000.0000
	display. If necessary, you can also
	change the channel by scrolling the
	VFO.
3.	Press E.

Note: • If the frequency you want to store exists already, WARNING appears on the display and you will hear a beep. (See “Duplicate Frequency Alert” on page 27.)

•After storing the frequency, it moves to the Search Hold mode.

•In case there is a not a free channel, the frequency you want to store will automatically be stored in the previous channel before you entered into Chain Search mode.

4.Repeat steps 1, 2 and 3 after starting the search for all the search frequencies you want to store.

Auto Storing

The scanner automatically stores active frequencies if Auto Store feature is turned ON.

But the frequencies already stored can not be stored. To make use of this feature, set a search range first (see page 36), then enter into the Menu mode. If you start this feature without setting a search range, NO LIMIT DATA appears on the display.

1.Press MENU/BACK.

2. Select 1:SERVICE OPTION / 2:CHAIN SEARCH

/ 6:AUTO STORE by rotating the VFO and pressing E.

3.Select 1:ON by rotating the VFO and

pressing E.	AUTO STORE
4. Select the bank number you want to	SELECT BANK
	12--56----
use with the keypad. The selected
bank number appears on the display.
Note: If the selected bank has no free	AUTO STORE
channels to store, CH DATA	ERROR
FULL will appear on the display	CH DATA FULL
and you will hear a beep.

39