ID Scan Mode
1.Press SCAN to begin scanning the lists you have programmed.
If you haven't programmed more than 2 IDs, ERROR appears on the display.
ID SCAN 867.9875 FM 
List 1234567890
2.To remove a Scan List from active scanning, press the number of the Scan List on your keypad.
Hint: Press and hold RSM for 2 seconds, the scanner will move to the next trunking bank.
The Scan List indicator turns Off, and the IDs in that list are not scanned.
Note: One Scan List must always be active. If you try and
deactivate all the Scan Lists, Scan List 1 will automatically be active.
3.To restore a Scan List to active scanning, press its number again.
4.Press SEARCH to return to Trunk Tracking Search mode.
☞Remember! When you press and hold TRUNK for 2 seconds, you can switch Trunk Tracking modes (Scan or Search).
Note: • While ID scanning, to change all trunking banks to the Air Service Search mode, press AIR/STEP.
•Selecting a Scan List is also possible in the Menu mode. (LTR only)
•ID SCAN appears on the display during Trunk Scan instead of simply SCAN.
51