• ID Search mode/ID Search Hold mode
MENU MODE
1:SERVICE OPTION
2:SCAN OPTION
3:SYSTEM OPTION
Menu Description and Numeric Keypad Equivalents
Below are the Menu screens and a brief description or purpose of the feature.
1:SERVICE OPTION
1:AIR
The Air Service Search feature allows you to scroll through the preprogrammed services.
2:CHAIN SEARCH
You can program up to 10 search ranges. The first time you program a range you will need to do so through the Menu. After the first time you can program a range as you do on most any other scanner, using the numeric keypad or VFO control. Use this Menu item to select the search range that you want to program. You can program range 1 through 10, one at a time. For each of the ranges, the following options can be modified.
1:CHAIN SEARCH
You must turn Chain Search feature ON, in order to use the Chain Search feature.
2:SEARCH RANGE
1:RANGE
Enter the upper and lower frequency limits of the Search Range.
2:STEPS
You can assign a variety of step sizes to the search range.
Note: The default step is usually acceptable and is listed on page 1.
3:MODE
You can change the Auto receive mode to AM, FM, WFM, NFM.
17