4:ALPHA TAG
You can enter an Alpha Tag for any or all of the search ranges.
5:TRUNK
During Chain Search mode, when the scanner finds an active frequency. The trunk tracking system will be active. Four frequency plans apply to the Control Channel Only feature (for details see page 69).
3:DELAY
Set the delay for the search ranges to 1:ON or 2:OFF. This applies to Search mode (See 2:SCAN OPTION / 1:CONVENTIONAL / 2:DELAY
for details).
4:ATTENUATOR
Set attenuation for all search ranges. (See 2:SCAN
OPTION/1:CONVENTIONAL / 5:ATTENUATOR for details).
5:TONE DATA
The default mode is 2:OFF. This means that you will receive all transmissions on any frequencies that are active within your search range(s). By selecting CTCSS or DCS you can set the radio to receive only a particular subaudible tone to be received during your search. You can also lockout a particular CTCSS or DCS tone. You may wish to do this if you want to search a range but not hear transmissions on any frequency that has a particular subaudible tone.
Note: Through the System Menu you can set the radio to operate in Tone Search mode during Search as well. In this mode, the radio will automatically determine the active subaudible tone on any frequency received during the search.
6:AUTO STORE
You can automatically store active frequencies found during a search into the memory. You can select which bank you want to program the found frequencies. The audio will be muted during Auto Store.
18