Uniden UBC3300XLT manual ID Scan Hold Feature, Trunked Search, ID Monitor Mode

ID Scan Hold Feature

If you want to stop on a ID during ID scanning, press HOLD/MAN.

If you want to resume scanning, press RSM.

To directly access a specific channel:

There are several ways to access a specific ID quickly.

1.Press HOLD/MAN.

2.By using the keypad or rotating the VFO, enter the ID location number (See page 47).

M1-1:4128
867.8375	FM
ID Tag
LIST Tag
C1000
0000.0000
Bank 10
CH/
FRQ
HOLD/	RSM
MAN
SCAN AIR/STEP	SEARCH
MENU/BACK	TRUNK
L/O

3. Press HOLD/MAN again.	REVERSE	SELECT
	.	E

Trunked Search

Once you have programmed all the frequencies for a trunked system, Search will let you immediately start hearing transmissions.

Press SCAN, and select the bank(s) you wish to receive, just as you select banks in conventional scanning and ID scanning.

Hint: Press and hold RSM for 2 seconds, the scanner will move to the next trunking bank.

Talkgroups display differently in Motorola, EDACS and LTR systems. You should read the appropriate parts of this guide to understand the formats.

The display indicates the bank and the type of trunked system you are monitoring. You can change this to display a bank tag by using the System Option menu.

Regardless of the system, you won't know exactly who you are receiving until you listen for a while, or refer to frequency guides or internet sites such as www.bearcat1.com.

Of course, figuring out who each ID represents is half the fun of TrunkTracking.

Later, when you learn more about a system, you will want to store lists of talkgroups. Then you can scan specific agencies and users, and use the many other features your radio provides.

ID Monitor Mode

To enter Scan Hold mode for conventional system in the bank

52