Mute On/Off
To manually turn ON the Mute function, press and hold MUTE until MUTE ON is displayed.
You will not hear any audio. To turn it OFF, press and hold MUTE again.
Receiving Mode Selection
You can also set the receiving mode, AM or FM etc., in Conventional mode or Chain Search mode.
See MODE in "Menu Description" for details.
Frequency and Channel Tuning with the VFO Control
The VFO knob can be used for stepping through frequencies or stepping through memory channels (for Conventional channels or Talkgroup ID Scan Lists).
To switch the setting for the VFO control, press and hold HOLD/MAN for 2 seconds. This will change modes from Channel to Frequencies or Frequencies to Channels.
1.In Conventional mode, when the setting for the VFO is channel, rotate the VFO to move up (to step up through channels) or down (to step down through channels). If you are in Trunk Manual mode, you will step through Scan List memory locations.
2.In Chain Search mode, when the setting for the VFO is frequency, rotate the VFO to move up to step up through frequencies sequentially or to down to step down through frequencies. To change the step, you will need to go into the Chain Search menu and adjust the step for the desired memory location.
78