Uniden UBC3300XLT manual 001 512.0000 FM Ctcss 250.3 Bank, FM DCS Bank, 001 512.0000 FM Bank, 003

3.Rotate the VFO to select one type (1:CSQ, 2:TONE SQ, 3:TONE SEARCH) and press E.

4.To set Tone Lock mode, do the following first, then select

2:TONE SQ in step 3.

1)For Scan mode, select 2:SCAN OPTION / 1:CONVENTIONAL - select the channel number -

3:TONE DATA - 1:CTCSS or 2:DCS by rotating the VFO and pressing E. With CTCSS or DCS, Tone Lock ON is set by pressing L/O.

2)For Search mode, select 1:SERVICE OPTION /

2:CHAIN SEARCH / 5:TONE DATA /

1:CTCSS or 2:DCS by rotating the VFO and pressing E. With CTCSS or DCS Tone Lock ON is set by pressing L/O.

Note: • To set Tone Lock OFF for either Scan mode or Search mode, press E instead of pressing L/O on step 1) or 2) above.

•CTCSS: Continuous Tone Coded Squelch System.

•DCS: Digital Coded Squelch.

•For example, the scanner shows the following displays. When Search mode and Tone Search are selected, the display shows the frequency and tone data alternately.

C 001

512.0000 FM

CTCSS 250.3 Bank 1

Tone SQ ON, CTCSS 250.3 Hz setting

C 001

512.0000 FM DCS 025

Bank 1

Tone SQ ON, DCS 025 setting

C 001 512.0000 FM

Bank 1

Tone SQ ON,

CTCSS & DCS non-setting

C 003

512.0000 FM

CTCSS 250.3

UNIDEN Group A

Tone Search, CTCSS 250.3 Hz detecting

C 003

512.0000 FM DCS 025

UNIDEN Group A

Tone Search, DCS 025 detecting

C	003
512.0000	FM

UNIDEN Group A

Tone Search,

no signal received

•If the Delay feature has been set while in Tone Search mode, it resumes scanning after a 2 second delay.

41