4.Select 3:TALK GROUP by rotating the VFO and pressing E.
5.Select the ID location by rotating the VFO or using the keypad and then press E. You decide which location you want to place the Talk Group ID. (The first number
represents the Scan List number and the second number represents the Memory Location number.) (Direct entry
method example: enter | ||
pressing 1, . (decimal key), 5.) | ||
| ||
6. Select 1:ID by rotating the VFO | ¡ | |
ENTER ID | ||
and pressing E. |
7. Enter the ID.
Note: After you have programmed the ID in a selected location, while still in the Menu mode, you can set your Alpha Tag (see page 28), or turn ON the Beep Alert for an individual talkgroup (see page 21).
To enter a Type 2 Talk Group ID:
1.Enter the ID you want to store.
2.Press E.
To enter a Type 1 ID:
For a Type I ID, the block number, Fleet number and Subfleet number make up the talk group ID number. Please see page 88.
M5-0
4128
1216¡
ENTER ID
M5-0
050-2¡
ENTER ID
1. Enter the ID you want to store. (ID= Block number + Fleet number + . (decimal key) + Subfleet number)
2. Press E.
To enter an EDACS® ID:
1. Enter the ID you want to store. Use the . (decimal key) for the "dash".
2. Press E.
E5-0
09-022¡
ENTER ID
Hint: Remember that Uniden's AFS format allows you to enter full or partial EDACS IDs for powerful flexibility in all modes. Be sure to read the section "EDACS Reception" on page 60 to learn how this works.
Note: The UBC3300XLT default to "AFS" talkgroup displays for EDACS® only.
48