Programming
Miscellaneous Programming
You can program miscellaneous settings suitable for use.
1 ➜ S ➜ ABCDEFGH ➜ S (➜ S)
Parameters: | Selection: | Entry: | ||
A | Date format | MMDDYY | 0 | |
|
| DDMMYY* | 1 | |
|
| YYMMDD | 2 | |
B | Time format |
| 12 hour format | 0 |
|
|
| 24 hour format* | 1 |
C | Decimal point position for domestic currency |
|
| 0 though 3 (Default: 2) |
D | Resetting receipt no. when issuing Z report | No* | 0 | |
|
| Yes | 1 | |
E | Amount tendered compulsory for t | No* | 0 | |
| and C | Yes | 1 | |
F | Subtotaling compulsory | No* | 0 | |
|
| Yes | 1 | |
C | Entry digit limit for R, C, V and p |
|
| 0 though 8 (Default: 8) |
H | Rounding | Round off* | 0 | |
|
| Round up | 1 | |
|
| Round down | 2 | |
•Time format
When 12 hour format is set, the a.m. time will be displayed with 
and printed without no mark, and the p.m. time will be displayed with 
and printed with the mark @.
•Amount tendered compulsory
When set for compulsory, always enter the amount tendered by the customer before finalizing the transaction.
•Subtotaling compulsory
When set for compulsory, always press S before finalizing the transaction.
Consecutive Receipt Number Programming
The receipt number is printed on every receipt or journal, and report, together with the date and time. The number is incremented each time a receipt is issued. To start from a specific consecutive number, enter a figure one less than that number.
Receipt start number (max. 4 digits) ➜ x ➜ S (➜ S) (Default: 0001)
19