Outback Power Systems manual STATUS/FN Stats Meter Shunt Batt TOP STATUS/DC/SHUNT a

Page 21

METER/DC/SHUNT C removed

AH 0kWH

DOWN UP TOP

METER/DC/SHUNT C charged

AH 0kWH

DOWN UP TOP

STATUS/FN/METER DC firmware revision

000.00/040

DOWN UP TOP

STATUS/FN/METER end of meter menu

UP

TOP STATUS

STATUS/FN

STATS

METER SHUNT BATT TOP

STATUS/DC/SHUNT A

max removed

 

amps

0.9

DOWN UP

RESET TOP

Pressing the <DOWN> soft key brings up the SHUNT C charged screen.

Pressing the <DOWN> soft key brings up the FN fi rmware screen.

Pressing the <DOWN> soft key leads to the end of the meter menu

Press the <STATUS> soft key to return to the STATUS screen.

Press the <SHUNT> soft key to view the amps and kilowatts removed and charged in each shunt

In this example, SHUNT A has detected 0.9 amps removed. Press the <RESET> soft key to return this value to 0. Press the <DOWN> soft key to continue through the menu.

20

Image 21
Contents NetTM DC Warranty About OutBack Power SystemsFLEXnet DC User’s Guide 2007 All rights reserved Date and Revision DisclaimerContact Information JanuaryTable of Contents Introduction OutBack Power Systems FLEXnet DCSystem Overview Reading the FLEXnet DC Postion wiring blockFLEXNet DC package includes Installing the FLEXnet DCConnect each twisted pair to a shunt Wiring Block Connections Torque ValuesWhite to BAT Black to BAT + Installing the FLEXnet DC FLEXNet DC Measurements Maximum battery voltageKiloWatts Maximum amp chargedUser Adjustable Set Points Logged DataData Logging Programming and Using the Mate for FLEXNet DC Operations FLEXNet DC Modes All unused channels should be set to disabledCharge Cycle Typical charge cycleGreen Yellow RED Programming the Auxiliary Relay Auto ModeRelay Logic Invert Logic Hi Set Point SatisfiedMate Screens Readings Press the DC soft key to view the status of the FlexNet DCDown Status STATUS/FN Stats Meter Shunt Batt TOP STATUS/DC/SHUNT a Down UP Reset Down UP Reset TOP STATUS/DC/BATT UP TOP Status ADV BAT Shunt PG2 Press the ADV soft key Press the DC soft key Press the Charge soft keyPG1 Charge AUX PG3 ADV/DC/AUX Control ADV/DC/AUX SOC LOW PG2 Reset CLR Main Technical Notes Battery Charge Factor BCFFLEXnet Products Year Limited WarrantyRevision.2007-08-29 Outback Power Systems Inc 19009 62nd Ave. NE Limited Warranty RegistrationREV B