Outback Power Systems DC manual ADV BAT Shunt PG2

ADV/DC/PAGE 1----------------

choose category

ADV BAT SHUNT PG2

ADV/DC/BAT-------------------

battery capacity

amp hours

TOP INC DEC ADV

ADV/DC/PAGE 1----------------

choose category

ADV BAT SHUNT PG2

ADV/DC/SHUNT 1 ---------------

shunt 1 mode

DOWN EN DIS TOP

Pressing the <DOWN> soft key changes the shunt being enabled or disabled.

ADV/DC/SHUNT-----------------

shunt setup complete

TOP ADV MAIN

ADV--------------------------------

choose device:

FX CC DC MATE

ADV/DC/PAGE 1----------------

choose category

ADV BAT SHUNT PG2

Press the <BAT> soft key.

Use the battery capacity screen to set the battery bank capacity using either the <INC> or <DEC> soft key. When finished, press the <TOP> soft key.

Press the <SHUNT> soft key.

Shunt 1 is, by default, enabled or active when the FX is powered up. Pressing the <DIS> soft key disables the first shunt. Pressing the <DOWN> soft key leads to the shunt 2 mode and shunt 3 mode screens. These shunts are disabled at power-up and are enabled by pressing the <EN> soft key. When the setup for all shunts has been completed, press the <DOWN> soft key for the next screen.

Press the <ADV> soft key.

Press the <DC> soft key.

Press the <PG2> soft key.

24