Outback Power Systems DC manual Down UP Reset

Page 22

STATUS/DC/SHUNT A max removed

kWatts 0.010

DOWN UP RESET TOP

Displaying the kilowatts removed provides the user with more precise energy usage information. This figure can be returned to 0 by pressing the <RESET> soft key. Press the <DOWN> soft key to view the max charged screen.

STATUS/DC/SHUNT A max charged

amps39.8

DOWN UP RESET TOP

STATUS/DC/SHUNT A max charged

kWatts 0.510

DOWN UP RESET TOP

SHUNT A shows a maximum of 39.8 amps charged. Pressing the <RESET> soft key returns this value to 0. Press the <DOWN> soft key to continue in the STATUS menu.

SHUNT A shows 0.510 kilowatts as the maximum charged. Pressing the <RESET> soft key returns this value to 0. Press the <DOWN> soft key to view SHUNT B and SHUNT C values. Proceed through the same steps as in SHUNT A. When finished with SHUNT C, the end of shunt status menu screen appears

CONTINUING TO PRESS THE<DOWN> SOFT KEY LEADS TO max removed amps, max removed kWatts, max charged amps, and max charged kWatts for SHUNT B and SHUNT C

STATUS/DC/SHUNT end of shunt status menu

UP TOP STATUS

STATUS/DC

STATS

METER SHUNT BATT TOP

STATUS/DC/BATT

total days at 100% 0.5

DOWN UP RESET

Press the <STATUS> soft key.

Press the <BATT> soft key to view the FlexNet DC battery readings

STATUS/DC/BATT displays the number of days the battery has been at 100% SOC. Press the <RESET> soft key to restart the timer. Press the <DOWN> soft key to view the next battery status screen.

21

Image 22
Contents NetTM DC About OutBack Power Systems WarrantyFLEXnet DC User’s Guide 2007 All rights reserved Contact Information DisclaimerDate and Revision JanuaryTable of Contents OutBack Power Systems FLEXnet DC IntroductionSystem Overview Postion wiring block Reading the FLEXnet DCInstalling the FLEXnet DC FLEXNet DC package includesConnect each twisted pair to a shunt Torque Values Wiring Block ConnectionsWhite to BAT Black to BAT + Installing the FLEXnet DC KiloWatts Maximum battery voltageFLEXNet DC Measurements Maximum amp chargedLogged Data User Adjustable Set PointsData Logging Programming and Using the Mate for FLEXNet DC Operations Charge Cycle All unused channels should be set to disabledFLEXNet DC Modes Typical charge cycleGreen Yellow RED Relay Logic Auto ModeProgramming the Auxiliary Relay Invert Logic Hi Set Point SatisfiedMate Screens Press the DC soft key to view the status of the FlexNet DC ReadingsDown Status STATUS/FN Stats Meter Shunt Batt TOP STATUS/DC/SHUNT a Down UP Reset Down UP Reset TOP STATUS/DC/BATT UP TOP Status ADV BAT Shunt PG2 Press the Charge soft key Press the ADV soft key Press the DC soft keyPG1 Charge AUX PG3 ADV/DC/AUX Control ADV/DC/AUX SOC LOW PG2 Reset CLR Main Battery Charge Factor BCF Technical NotesYear Limited Warranty FLEXnet ProductsRevision.2007-08-29 Limited Warranty Registration Outback Power Systems Inc 19009 62nd Ave. NEREV B