ADV/DC/PAGE
choose category
PG1 CHARGE AUX PG3
return amps
DOWN INC DEC TOP
battery charge
DOWN INC DEC TOP
parameters met time minutes
DOWN INC DEC TOP
% | |
charge factor | |
DOWN INC DEC | TOP |
charge parameters complete
TOP ADV MAIN
choose device:
FX CC DC MATE
Press the <CHARGE> soft key.
The return amps screen allows the user to set the end of charge amps using the <INC> and <DEC> soft keys. Press the <DOWN> soft key to view the battery charge screen.
Set the end of charge voltage using the <INC> or <DEC> soft keys. Next, press the <DOWN> soft key.
Press the <INC> or <DEC> soft keys to determine the amount of time the charge parameters must be met before they are considered an accurate state of charge. The default period is one minute. By establishing a time, momentary spikes in voltage are accounted for. Press the <DOWN> soft key to view the charge factor screen.
Set the charge factor (see page 13) using the <INC> and <DEC> soft keys. When finished, press the <DOWN> soft key.
Press the <ADV> soft key.
Press the <DC> soft key.
25