Outback Power Systems DC manual UP TOP Status

Page 24

STATUS/DC/BATT lifetime kAH removed 5

DOWN UP RESET TOP

STATUS/DC/BATT----------------

end of battery status menu

UP TOP STATUS

MAIN-------------------------------

11:30:55A

SUM STATUS SETUP ADV

ADV/SETTINGS/WARNING Changes made could adversely effect system performance

ADV/PASSWORD enter the password

132

ENTER INC DEC EXIT

ADV/PASSWORD enter the password

141

ENTER INC DEC EXIT

ADV--------------------------------

choose device:

FX CC DC MATE

lifetime kAH removed shows the total kilowatt amp hours removed from the battery. This is essentially an “odometer” for battery usage. Press the <DOWN> soft key to continue.

Press the first two soft keys to return to the MAIN menu.

Press the <ADV> soft key.

This screen acts as a warning intended to keep those unfamiliar with an OutBack system from altering the settings. Push any key to advance to the enter the password screen.

Push the <INC> soft key until 141 appears; this is the password.

When 141 appears on the screen, press the <ENTER> soft key.

Press the <DC> soft key.

23

Image 24
Contents NetTM DC Warranty About OutBack Power SystemsFLEXnet DC User’s Guide 2007 All rights reserved Disclaimer Date and RevisionContact Information JanuaryTable of Contents OutBack Power Systems FLEXnet DC IntroductionSystem Overview Postion wiring block Reading the FLEXnet DCInstalling the FLEXnet DC FLEXNet DC package includesConnect each twisted pair to a shunt Wiring Block Connections Torque ValuesWhite to BAT Black to BAT + Installing the FLEXnet DC Maximum battery voltage FLEXNet DC MeasurementsKiloWatts Maximum amp chargedUser Adjustable Set Points Logged DataData Logging Programming and Using the Mate for FLEXNet DC Operations All unused channels should be set to disabled FLEXNet DC ModesCharge Cycle Typical charge cycleGreen Yellow RED Auto Mode Programming the Auxiliary RelayRelay Logic Invert Logic Hi Set Point SatisfiedMate Screens Press the DC soft key to view the status of the FlexNet DC ReadingsDown Status STATUS/FN Stats Meter Shunt Batt TOP STATUS/DC/SHUNT a Down UP Reset Down UP Reset TOP STATUS/DC/BATT UP TOP Status ADV BAT Shunt PG2 Press the Charge soft key Press the ADV soft key Press the DC soft keyPG1 Charge AUX PG3 ADV/DC/AUX Control ADV/DC/AUX SOC LOW PG2 Reset CLR Main Battery Charge Factor BCF Technical NotesYear Limited Warranty FLEXnet ProductsRevision.2007-08-29 Limited Warranty Registration Outback Power Systems Inc 19009 62nd Ave. NEREV B