Panasonic KX-FL501C manual Pull up the right edge of the used toner

Page 69

Replacement

5	Pull up the right edge of the used toner
5	cartridge ( 1 ). Remove the cartridge from
	the drum unit ( 2 ).
	The toner may stick to the cartridge and
	●
	the drum unit. Be careful when handling.
	See page 4 for details.
	Do not drop the toner on the green drum
	●
	surface.
	Put the used toner cartridge into the
	●
	protection bag.
6	If you replace the drum unit at the same
6	time, remove the new drum unit from the
	protection bag. Remove the protection bar
	from the drum unit.
	With Panasonic face up on the toner
	cartridge, match the red arrows on the
	cartridge and the drum unit.
7	Slide the tab of the toner cartridge into
7	the slot of the drum unit.

Used toner cartridge

21

Drum unit

Green drum surface

Hold here.

Protection bar

Red arrows

New toner	Drum unit
New drum unit cartridge	Drum unit
	Tab
	Slot

8a	Hold right side of the toner cartridge
	under the lip on the drum unit and...

8b	turn the two levers on the toner cartridge
	with firm pressure.

9	The toner cartridge is installed when the
	triangles match.

10 Tap on the toner cartridge several times to allow the toner to fall into the drum unit. Grab the tabs, and shake the drum and toner unit horizontally several times.

Levers

Triangles

Toner cartridge

Tabs

69

Image 69

Contents PFQX1493ZA BM1100MN0 Operating InstructionsFor your future reference You can select English or French for the languageImportant safety instructions Safety instructionsFuser unit Laser radiationToner cartridge Drum unitOther Information InstallationTable of Contents Copy Included accessories AccessoriesAccessory information Model No Usage SpecificationsHelp function Help ButtonHelp Speed DirectorOverview Finding the ControlsDocument guides Handset Speaker Paper tray Left side of the unitLocation Setup Toner cartridge and drum unitGreen drum surface Toner save feature Paper tray Paper tray, document stacker and paper stackerDocument stacker Paper stackerAdding paper Recording paperConnections Date and time, your logo and facsimile telephone number Setting the date and timeMenu Speed Director SET StopSetting your logo FlashHandset Mute To select characters using Speed Director To select characters with the dial keypadDisplay order of characters System SET Setting your facsimile telephone numberYour FAX no To correct a mistake To delete a numberAdjusting volumes VolumesRinger volume Handset receiver volumeStoring names and telephone numbers in ONE-TOUCH Dial Automatic DialingDirectory Program Flash Lower SETSpeed Director until Storing names and telephone numbers in Speed DirectorNAME= Flash Stop SETEditing a stored name and number Editing and erasing a stored name and numberEDIT= DELETE=# Directory Program SETErasing a stored station and item Delete OK? YESSET/NOSTOPDeleted Using ONE-TOUCH Dial Making a voice call using ONE-TOUCH Dial and Speed DirectorUsing Speed Director Monitor NAME/TEL noCall Display service from your phone company Call DisplayHow Caller information is displayed Viewing and calling back using caller information MonitorCall Display Search Confirming caller information using the Caller’s list Printing and erasing the Caller’s listCall Display Print Stop SET Speed Director until the name For Speed Director Rotate Speed DirectorSpeed Director SET Call Display Search Lower Initiating voice contact Voice ContactReceiving a request for voice contact Press MonitorSending Faxes ResolutionSending a fax manually FAX StartUsing ONE-TOUCH Dial Sending a fax using ONE-TOUCH DialUsing Speed Director Fax auto redialDocuments you can send Document weightMaximum size Effective scanning areaSending report Reports for confirmationJournal report Sample of a sending reportProgramming the stations Broadcast transmissionManual Broad Manual Broad Broadcast ONE-TOUCHBROADCAST1 Adding a new stationADD= DELETE=# Directory Program SET Speed DirectorErasing a stored station Directory Program SET Speed Director StopDelete OK? YESSET/NOSTOP Deleted To cancel the broadcast setting Stop FAX Start Resolution SET Speed DirectorSending the same document to pre-programmed parties Manual Broad BroadcastReceiving Faxes Setting the unit to receive faxesTEL/FAX mode With a PCRemote Fax activation Activating TEL mode TEL mode Answering all calls manuallyReceiving a fax manually Stop FAX StartFAX only mode All calls are received as faxes Activating FAX only modeAfter 3 Rings Setting up the fax machine and an answering machine Using the unit with an answering machineReceiving a voice message and fax document in one call How the fax machine and answering machine workReceiving voice calls Receiving fax callsTo set TEL/FAX mode TEL/FAX delayed ring countCall is received Voice callTwice TEL/FAX delayed ring count Voice call See below When an extension telephone is connectedExtension telephone Using with an answering machine and computerWhen your pager receives a pager call Pager call when the unit receives a faxSpeed Director SET Monitor REDIAL/PAUSE PauseCopying To select the resolution according to the type of documentMaking a copy Convenient way to make a copyTo reduce or enlarge a document To collate multiple copiesCOLLATE=ON Features Summary ProgrammingGeneral programming method Basic features ErrorProgramming table OFF How to set menu optionsTone Letter#22 Advanced features#23 #25#30 #26#31 #37English Normal#49 Press SET#68 #70#77 FAX only#78 #79Error Messages Communication message Error Cause & solution CodeReports Display Display message Cause & solutionNo FAX Reply Transmit ErrorOUT of Paper Paper JammedOperations Problem Cause & solution Cannot receive documents Problem Cause & solution Cannot send documentsOther party complains that Letters on their receivedProblem Cause & solution Cannot select the desired Problem Cause & solution Printing quality is poorReceive mode Problem Cause & solution Unit does not make a copyCode to access the answering Pressed the remote accessCannot receive voice MessagesSample of a power down report If a power failure occursReplacing the toner cartridge and the drum unit ReplacementToner LOW Toner Empty Fuser unit gets hotPull up the right edge of the used toner When the recording paper has jammed in the unit Replacement / JamsRecording paper jam Waste disposal methodJams When the recording paper was not fed into the unit properlyDocument jams sending No feeding or multiple feeding occurs while sendingFuser unit gets hot Do not touch it Cleaning the inside of the unit CleaningRemove the drum and toner unit by Reference lists and reports Printed ReportsIf YOU Ship the Product to a Servicentre WarrantySafety Precautions Important InformationImportant information Technical data about this product SpecificationsDrum life Toner lifeToner life for KX-FA76AIndex IndexSpeed Director Panasonic Canada Inc