Panasonic manual Laser radiation, Fuser unit, KX-FLB811 KX-FLB801, Toner cartridge, Drum unit

Page 6

Important Information

Laser radiation

LThe printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Fuser unit

LThe fuser unit (1) gets hot. Do not touch it.

LDuring or immediately after printing, the area near the recording paper exit (2) also gets warm. This is normal.

KX-FLB811

1

2

KX-FLB801

1

2

Toner cartridge

LBe careful of the following when you handle the toner cartridge:

Do not leave the toner cartridge out of the protection bag for a long time. It will decrease the toner life.

If you ingest any toner, drink several glasses of water to dilute your stomach

contents, and seek immediate medical treatment.

If any toner comes into contact with your eyes, flush them thoroughly with water, and seek medical treatment.

If any toner comes into contact with your skin, wash the area thoroughly with soap and water.

If you inhale any toner, move to an area with fresh air and consult local medical personnel.

Drum unit

LRead the instructions on page 13 before you begin installation of the drum unit. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protection bag:

Do not expose the drum unit to light for more than 5 minutes.

Do not touch or scratch the black drum surface.

Do not place the drum unit near dust or dirt, or in a high humidity area.

Do not expose the drum unit to direct sunlight.

WARNING:

LTo prevent the risk of fire or electrical shock, do not expose this product to rain or any type

of moisture.

LUnplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or

electric shock. Confirm that smoke has stopped and contact an authorized service center.

LMake sure that the unit is installed in a well ventilated room so as not to increase density of ozone in the air. Since ozone is heavier than air, it is recommended that air at floor level be ventilated.

Illegal copies

LIt is unlawful to make copies of certain documents.

Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may be imposed on those found guilty. The following are examples of items that may be illegal to copy in your country.

Currency

Bank notes and checks

4For assistance, please visit http://www.panasonic.com/consumersupport

Image 6
Contents Operating Instructions How to use the operating instructions OpenLocation of controls Directory EStop K Trademarks Thank you for purchasing a Panasonic fax machineEnergy Star CopyrightImportant safety instructions InstallationKX-FLB811 KX-FLB801 Laser radiationFuser unit Toner cartridgeDamage to the unit Poor print quality Improper Operation For best performanceToner cartridge and drum unit Static electricityRoutine care Unit should not be exposed to direct sunlightRecording paper Moving the unitDistinctive Ring service from your Selecting the operation mode FaxUsing the unit with an answering Using two or more phone numbers on aReplacing the toner cartridge Cleaning the white plateCleaning the document feeder Document jams Auto documentIncluded accessories Part number*1 QuantityAccessory information Description of buttonsOverview Front viewRear view E F G HToner cartridge and drum unit Close the manual input tray 3 before opening the top cover Output tray Toner save featureDocument tray For KX-FLB811 usersFor KX-FLB801 users If the top part of the extender is detachedIf the extender is detached KX-FLB811 KX-FLB801Using the paper input tray Recording paperUsing the manual input tray Approx kg 4.4 lbPaper in Tray #2 For PC Printing Using the optional handset unit Using surge protectorsConnections System Setup Dialing modeSelecting the operation mode Fax/Copy/Scan Dialing ModeAdjusting volume Help functionExample August 10, 2006 Press 08 10 If you have subscribed to a Caller ID serviceDate and time Example 1015PM 12 hour clock entry 1. Press 10Zoom Your logoZOOM/QUICK Scan Menu SET Flash Quick Scan StopTo erase all characters, press and hold To select characters using V orTo delete a character To insert a characterYour FAX no Press SET Your fax numberMenu Stop SET Flash To delete a numberUsing the auto document feeder Using the unit as a fax machineEntering the fax mode Sending a fax manuallyUsing the scanner glass FAX SET Stop Quick Scan StartPAGES=01 Document weightExample StandardDirectory Menu Stop Dial ModeStoring one-touch dial item For stationsErasing a stored item Storing navigator directory itemsEditing a stored item To delete a character/numberFax auto redial Using stationsUsing navigator directory If your unit does not send a faxAdding a new item into the broadcast memory Broadcast transmissionProgramming items into the broadcast memory Erasing a stored item from the broadcast memoryTo cancel broadcast transmission Sending the same document to pre-programmed partiesReceiving a fax automatically Auto answer on Activating FAX only modeActivating TEL mode Receiving a fax manually Auto answerHow to receive faxes with the optional handset unit Using the unit with an answering machineSetting up the unit and an answering machine To stop receivingStoring undesired callers Fax activation code feature #434 onActivating the junk fax prohibitor Receiving a voice message and fax document in one callTo display the junk fax prohibitor list To print the junk fax prohibitor listTo erase an item from the junk fax prohibitor list How Caller ID is displayed Caller ID serviceViewing and calling back using caller information Menu Stop Caller IDErasing all caller information Into the one-touch dial feature and navigator directoryStoring caller information Erasing specific caller informationActivating the Distinctive Ring feature Distinctive Ring service from your phone companyUsing two or more phone numbers on a single telephone line Ring pattern SettingsProgramming the ring pattern assigned for fax Other triple ring short Short-long rings 1st ring 2nd ringMaking a copy Using the unit as a copy machineEntering the copy mode Copy StopText For documents containing only text You can change the default resolution in feature #461To stop copying Copy Stop StartTo enlarge a document More copying featuresUsing the scanner glass Original documentExample Making 2 copies of a 4-page original document Collated pages Uncollated pagesCPU Connecting to a computerInstalling Multi- Function Station RAMTo use the other unit with the computer Insert the included CD-ROM into your CD- ROM driveImportant notice for Windows XP users To modify the softwareUsing the unit as a printer Starting Multi-Function StationPrinting from Windows applications Transparencies LabelsEnvelopes Remove each envelope after printingPeel-off strip Multiple flaps Using the unit as a scanner Using Multi-Function ViewerSelect ViewerScan Multi-Function Viewer will appear To scan documents quickly Using other applicationsOperating the unit from your computer Readiris OCR softwareFax sending/receiving using Multi-Function Station Select Pcfax Panasonic KX FLB811/PCFAX Panasonic KX-FLB801Other information KX- FLB811 only Changing the default output trayConfirming the status of the unit Receiving a fax into your computerOutput tab Basic Feature FAX Feature Copy Feature To cancel programmingTo select features by using the navigator key ProgrammingBasic features Correct settingNormal default For normal contrast OFF default Deactivates this feature Fax features Setting the Error To cancel after programming, press Stop then SETYou can also send a document using the scanner glass. Press On default You will hear connecting tonesEnter your code from 2 to 4 digits, using 0-9, * and # Feature/Code SelectionOn default Default code is #9Memory once, then transfer the data after recognition Feature/Code Selection Receiving a fax intoRecognize the connection, it will store a received document ConnectionCopy features To change the default resolution setting for copyingResolution Error messages Reports Error messages Display Display Cause & SolutionCable or the computer power cord is not connected correctly Service personnelPaper. Install paper page 18 Recording paper is installed in the manual input tray whenWrong Paper Size paper. Use the appropriate size paperWhen a function does not work, check here Initial settingsGeneral Fax sending Fax receivingPaper is installed Receiving modeAuto Answer indicator Documents automatically Pressing FAX Auto AnswerUsing an answering machine CopyingMulti-Function Station If a power failure occurs Replacing the toner cartridge and the drum unit Toner LOW Toner EmptyRemove the drum and toner unit 1 by holding the tabs Close the top cover until locked Waste disposal method When the recording paper has jammed inside of the unitRecording paper jam Display will show the followingRemove the jammed paper CasePull and hold the lever 1 to release the jammed paper When the recording paper is not fed into the unit properly Check Pick UP Input Tray #1Check Pick UP Input Tray #2 Document jams Auto document feeder When the document has jammed near the document exitWhen the document has jammed near the document entrance Remove the jammed document 1 carefullyCleaning the white plate and glasses Disconnect the power cord Open the document coverWhite plate and scanner glasses Close the document cover Re-connect the power cord If the document cover comes off from the unitLower glass Cleaning the document feeder rollers Help Reference lists and reports Specifications Toner life Recording paper weightEnvelope size % image areaDrum life FCC and Other Information Responsible Party Thermal Transfer Facsimile Limited WarrantyFAX categories Parts Labor Laser FacsimileFor In Limited Warranty product service Customer Services directory Customer Services DirectoryUser record For your future referenceAttach your sales receipt here Activating Installing Navigator directory Sending faxes Index100 101 102 103 No Extra Cost Panasonic FAX Advantage Program