8. Programmable Features
Feature/Code | Selection |
Setting the ring pattern for | {1} “A” |
fax (Distinctive Ring | {2} “B” |
feature) | {3} “C” |
{#}{4}{3}{1} | {4} “D” |
| {5} |
| See page 43 for details. |
Receiving other size | To receive a fax document that is longer than your recording paper. |
documents | {0} “OFF”: The unit will print the original size. |
{#}{4}{3}{2} | {1} “ON” (default): The unit will fit received documents onto your |
| recording paper. |
Changing the fax | If you wish to use an extension telephone to receive faxes, activate this |
activation code | feature and program the activation code. |
{#}{4}{3}{4} | Important: |
| |
| L The fax activation code must be different from the code that |
| you programmed on the answering machine. |
| {0} “OFF” |
| {1} “ON” (default) |
| 1. Press {MENU}. |
| 2. Press {#}, then {4}{3}{4}. |
| 3. Press {1} to select “ON”. |
| 4. Press {SET}. |
| 5. Enter your code from 2 to 4 digits, using |
| L The default code is “;#9”. |
| L Do not enter “0000”. |
| 6. Press {SET}. |
| 7. Press {MENU}. |
|
|
Setting the memory | To alert you with a beeping sound when a received fax document is |
reception alert | stored into memory due to some existing problem. |
{#}{4}{3}{7} | The slow beeps will continue until you clear the printing problem and |
| make sure the unit is supplied with enough paper to print the stored |
| document. |
| {0} “OFF”: Deactivates this feature. |
| {1} “ON” (default): You will be alerted to a reception problem by a |
| beeping sound. |
Setting friendly reception | To receive a fax automatically when you answer a call and hear a fax |
{#}{4}{3}{8} | calling tone (slow beep). |
| {0} “OFF”: You have to press {START} for fax reception. |
| {1} “ON” (default): You do not have to press {START} for fax |
| reception. |
Setting the output tray to | You can select the output tray that will be used for printing received |
use for faxing | faxes. |
{#}{4}{4}{1} | {1} “#1”: Upper output tray (Up to approx. 100 sheets). |
{2} “#2” (default): Lower output tray (Up to approx. 50 sheets). | |
| Note: |
| L Lists or reports printed by pressing {HELP} (page 23) or {MENU} |
| (page 89) will be stacked on the upper output tray. |
|
|
63