Installation, Power Connection | Rockford Fosgate P200.2, P1200.2

Rockford Fosgate P200.2, P1200.2, P850.2, P450.2, P650.2, P325.2 manual Installation, Power Connection

INSTALLATION

3.Trim the RED wire (power cable) within 18" of the battery and splice in a inline fuse holder. See Specifications for the rating of the fuse to be used. DO NOT install the fuse at this time.

4.Strip 1/2" from the battery end of the power cable and crimp a large ring terminal to the cable. Use the ring terminal to connect to the battery positive terminal.

5.Prepare the BLACK wire (Ground cable) for attachment to the amplifier by stripping 5/8" of insulation from the end of the wire. Insert the bare wire into the GND terminal and tighten the set screw to secure the cable in place. Prepare the chassis ground by scraping any paint from the metal surface and thoroughly clean the area of all dirt and grease. Strip the other end of the wire and attach a ring connector. Fasten the cable to the chassis using a non-anodized screw and a star washer.

NOTE:Keep the length of the BLACK wire (Ground) as short as possible. Always less than 30"(76.2cm).

6.Prepare the REM turn-on wire for for attachment to the amplifier by stripping 5/8" of insulation from the end of the wire. Insert the bared wire into the REM terminal and tighten the set screw to secure the wire in place. Connect the other end of the REM wire to a switched 12 volt positive source.The switched voltage is usually taken from the source unit's remote amp on lead. If the source unit does not have this output available, the recommended solution is to wire a mechanical switch in line with a 12 volt source to activate the amplifier.

7.Securely mount the amplifier to the vehicle or amp rack. Be careful not to mount the amplifier on cardboard or plastic panels. Doing so may enable the screws to pull out from the panel due to road vibration or sudden vehicle stops.

8.Connect from source signal by plugging the RCA cables into the input jacks at the amplifier.

9.Connect the speakers. Strip the speaker wires 1/2" and insert into the speaker terminal and tighten the set screw to secure into place. Be sure to maintain proper speaker polarity. DO NOT chassis ground any of the speaker leads as unstable operation may result.

10.Perform a final check of the completed system wiring to ensure that all connections are accurate. Check all power and ground connections for frayed wires and loose connections which could cause problems. Install inline fuse near battery connection.

NOTE:Follow the diagrams for proper signal polarity.

CAUTION:These amplifiers are not recommended for impedance loads below 2 stereo and 4 bridged.

Power

Connection

P550.2, P450.2, P200.2, P250.2, P850.2 specifications

Rockford Fosgate has established itself as a premier audio brand, known for delivering high-quality sound systems that cater to audiophiles and casual listeners alike. Among its impressive lineup of amplifiers, the P-Series stands out, comprising models such as the P650.2, P325.2, P1200.2, P850.2, and P250.2. These amplifiers not only showcase cutting-edge technology but also deliver exceptional performance that can transform any car audio experience.

Starting with the P650.2, this 2-channel amplifier is designed to provide a powerful punch in a compact form. Rated at 65 watts RMS per channel, it is perfect for driving a set of component speakers. The amplifier features a high-pass crossover, which ensures that only the desired frequencies are delivered to the speakers, enhancing sound clarity and reducing distortion. Its Class-D topology ensures efficient power usage, enabling it to produce high output with minimal heat generation.

The P325.2 is another compact 2-channel option, ideal for those who need reliable power without sacrificing space. With a rating of 75 watts RMS per channel, it caters well to entry-level setups while maintaining Rockford Fosgate’s signature sound quality. The adjustable gain control and variable crossover settings allow for customized tuning, making it versatile for various types of audio systems.

For users seeking substantial power, the P1200.2 is a 2-channel amplifier that is hard to overlook. With a robust output of 600 watts RMS per channel at 2 ohms, it offers ample power to drive larger speakers or even multiple pairs. Its advanced thermal management ensures the unit operates efficiently, preventing overheating during extended use. Additionally, the amplifier features full-range capability, making it suitable for both high and low-frequency applications.

The P850.2, another formidable 2-channel model, delivers 425 watts RMS at 2 ohms, providing a good balance between power and performance. This amplifier includes advanced circuitry that enhances both auditory dynamics and overall efficiency. It is built to accommodate various audio setups, making it a versatile choice for system upgrades.

Lastly, the P250.2 serves as an excellent entry-level option, with 25 watts RMS per channel at 4 ohms. It is designed for users looking to improve factory stereo sound without extensive modifications. This amplifier incorporates low-level inputs and an easy-to-use setup, making it ideal for novices venturing into the world of aftermarket audio systems.

Each of these amplifiers features Rockford Fosgate's signature build quality, with durable construction designed to withstand the rigors of automotive environments. With feature sets that include adjustable settings, optimized sound performance, and rugged design, the P-Series amplifiers from Rockford Fosgate deliver a comprehensive audio solution for every listener's needs.