Avery 206, 204, 256 manual Before beginning production, Due diligence of the user

Page 10

CONTENTS

1.2SAFETY INSTRUCTIONS

1.2.3Before beginning production

Due diligence of the operating company and the service technician

Ensure that the following prerequisites are fulfilled in accordance with the service instructions:

–The machine is installed properly and configured in accordance with the guidelines.

–All required safety mechanisms have been installed.

–The unit has performed at least one successful test run.

–The unit is connected to the power supply.

The users have the required personal protective equipment, for example, a hairnet. Ensure that the protective equipment is utilised correctly.

ALS 20x 256

GB

Due diligence of the user

Check that the safety installations are working properly.

Inspect the machinery for any visible damage. Report any ascertained defects immediately. Use the required personal protective equipment correctly, for example, wear a hairnet.

Remove any unnecessary materials and objects from the operating area of the unit.

Ensure that only authorised persons are within the operating range of the machine.

Ensure that starting up the machine will not injure anyone.

6

Image 10

Contents 204/206 256 Page Please note Product descriptionOperation Before operationAfter operation Operational failuresGeneral Notes Validity and binding effect of this manualIllustrations and descriptions Signs and symbolsButton symbols ParametersFollow the instructions Safety InstructionsInformation and qualifications Keep the product information at handProper usage Operational safety of the unitProtection against injuries by electrical current Protection against injuries by mechanical action Protection against injuries by chemicalsBefore beginning production Due diligence of the userSafety notes on the unit Pinch pointOverview ComponentsALS 20x Operating LED Error LEDControl panel LCD displayConnection arrangement Connections on the back of the deviceSensor connections Label Label HMode of operation Power supply Technical specificationsCharacteristics LabelsInternal Interfaces ElectronicsInterfaces Status messages, test functions, product profilesIntegration DimensionsEnvironmental conditions CertificatesRight-handed version Design modelsLeft-handed version Fixed dispensing edge OptionsExternal control panel Swivelling dispensing edgePneumatic dispensing edge Adjustable dispensing edge holderShape dispensing edge Applicator Outer Diameter control sensorPrinter Applicator interfaceDispensing mode Operating ModesOnline settings Dispensing speedFunction of the double-arrow button Configuration modeMenus Functions GermanFunction Descriptions Function overviewSERVICE/DIAGNOS Service Data Label Setup menu Machine Setup menuService Data menu Power supply connection Electrical ConnectionsConnecting the power cable Checking the power supply settingSwitch setting Permissible mains voltage Connecting sensors C DALS PrerequisitesRemoving spent backing paper Inserting Label MaterialInserting a label roll Removing glue residueThreading the label roll Threading guideThreading the label roll at the dispensing edge Threading the label roll onto the drive roller Fastening the label roll to the rewinderAdjusting the unwinder’s core diameter Mechanical SettingsPositioning the pressure roller Positioning the label sensor Starting label dispensing START-UP and ShutdownTurning on the unit Dispensing with a product sensorStopping the dispensing process Label pitch Configuration and MonitoringFunction menu settings Label stop positionConfiguring speed adaption Dispensing speed256 Label position on the productMissing labels Monitoring functionsMaterial tear Material endLoading a product profile Using Product ProfilesWhat are product profiles? Storing a product profileCall the Machine Setup Del. prod.profil function Deleting a product profileActive fuse Mains voltage Switch setting Maintenance and CleaningReplacing fuses Cleaning agents Removing paper debris Regular maintenanceRenewal of the dust filter liner ALS List of error messages Error MessagesReporting errors Status Status text CauseALS 20x Set to Dhcp Interface Para EU Declaration of Conformity Avery Dennison Deutschland GmbH