Avery 206, 204, 256 manual ALS 20x

CONTENTS

2.1OVERVIEW

ALS 20x 256

GB

A Control panel

–For sending commands to the device and for displaying operating states and error messages.

–An optional external control panel can also be connected to the device.

B Dancer arm

–Keeps the label material stretched tight evenly.

–Arrests the rotation of the material roll if tension diminishes.

C Dispenser

– Dispenser mandrel grasps the label roll. D Core diameter adapter

–For adjusting the diameter of the dispenser mandrel to match the core diameter of the label roll.

E Adjusting knob

–Turning this in a clockwise direction secures the label roll on the dispenser.

FDeflection rollers

GDispensing edge bracket

HLabel sensor

–Stops the label feed after a label has been dispensed.

I Pressure roller

– Prints the label once it is stuck to the product.

J Dispensing edge

–Standard: (non-adjustable) L-shaped dispensing edge

–The following options are available: V-shaped dispensing edge, adjustable L-shaped dispensing edge, spring-loaded L-shaped dispensing edge, pneumatic L-shaped dispensing edge

K Drive roller

– Drives the label material forwards. L Pressure mechanism

–Presses the pressure roller against the drive roller.

–Prevents the backing paper from slipping through.

–Releases automatically once the backing paper has been drawn around the drive roller.

M Dancer arm

– Controls the rewind speed.

N Rewinder

– Rolls up the used backing paper. O Release button

–Pressing this button reduces the diameter of the rewinder core.

–Allows the easy removal of the rewound backing paper.

9