Avery 204, 206, 256 manual Threading the label roll at the dispensing edge

Page 39

CONTENTS

3.2INSERTING LABEL MATERIAL

Threading the label roll at the dispensing edge

Unroll around 1 m of label strip and remove the labels from it.

Pass the backing paper around the first deflection roller [36A] and through the slot in the sensor [36B]. Feed the backing paper under the pressure roller [36C] to the dispensing plate [36D].

Feed the backing paper around the dispensing plate to the second deflection roller [36E].

ALS

20x

256

GB

A

B

C

E

D

[36]Path of the label strip at the dispensing edge. A 1st deflection roller

B Label sensor C Pressure roller D Dispensing plate

E 2nd deflection roller

35

Image 39

Contents 204/206 256 Page Product description Please noteOperational failures Before operationAfter operation OperationValidity and binding effect of this manual General NotesParameters Signs and symbolsButton symbols Illustrations and descriptionsKeep the product information at hand Safety InstructionsInformation and qualifications Follow the instructionsOperational safety of the unit Proper usageProtection against injuries by electrical current Protection against injuries by chemicals Protection against injuries by mechanical actionDue diligence of the user Before beginning productionPinch point Safety notes on the unitComponents OverviewALS 20x LCD display Error LEDControl panel Operating LEDConnections on the back of the device Connection arrangementLabel Label H Sensor connectionsMode of operation Labels Technical specificationsCharacteristics Power supplyStatus messages, test functions, product profiles ElectronicsInterfaces Internal InterfacesCertificates DimensionsEnvironmental conditions IntegrationDesign models Right-handed versionLeft-handed version Swivelling dispensing edge OptionsExternal control panel Fixed dispensing edgeAdjustable dispensing edge holder Pneumatic dispensing edgeShape dispensing edge Applicator interface Outer Diameter control sensorPrinter ApplicatorOperating Modes Dispensing modeDispensing speed Online settingsConfiguration mode Function of the double-arrow buttonMenus German FunctionsFunction overview Function DescriptionsSERVICE/DIAGNOS Service Data Machine Setup menu Label Setup menuService Data menu Electrical Connections Power supply connectionChecking the power supply setting Connecting the power cableSwitch setting Permissible mains voltage C D Connecting sensorsPrerequisites ALSRemoving glue residue Inserting Label MaterialInserting a label roll Removing spent backing paperThreading guide Threading the label rollThreading the label roll at the dispensing edge Fastening the label roll to the rewinder Threading the label roll onto the drive rollerMechanical Settings Adjusting the unwinder’s core diameterPositioning the pressure roller Positioning the label sensor Dispensing with a product sensor START-UP and ShutdownTurning on the unit Starting label dispensingStopping the dispensing process Label stop position Configuration and MonitoringFunction menu settings Label pitchDispensing speed Configuring speed adaptionLabel position on the product 256Material end Monitoring functionsMaterial tear Missing labelsStoring a product profile Using Product ProfilesWhat are product profiles? Loading a product profileDeleting a product profile Call the Machine Setup Del. prod.profil functionMaintenance and Cleaning Active fuse Mains voltage Switch settingReplacing fuses Cleaning agents Regular maintenance Removing paper debrisRenewal of the dust filter liner ALS Status Status text Cause Error MessagesReporting errors List of error messagesALS 20x Set to Dhcp Interface Para EU Declaration of Conformity Avery Dennison Deutschland GmbH