Avery 204, 206, 256 manual Protection against injuries by mechanical action

Page 9

CONTENTS

1.2SAFETY INSTRUCTIONS

Protection against injuries by mechanical action

WARNING!

Risk of injury due to moving and rapidly rotating parts!

Long hair, loose jewellery, long sleeves, and so on are not permissible when using the unit.

Sufficient protective clothing must be worn.

Keep moving parts free from obstructions even when the unit is not switched on, if there is a chance the machine might be turned on.

Switch off the machine before making any mechanical settings.

Do not wear ties, loose clothing, jewellery, wrist watches or similar items on your person when near the operating unit.

WARNING!

There is a risk that you may get your fingers or hands crushed on the dispensing edge by products on the conveyor belt!

Never reach between the product and the dispensing edge while the unit is in operation or ready for operation.

Never reach behind the safety guard or remove it while the unit is in operation.

Protection against injuries by chemicals

CAUTION!

Operating materials such as cleaning agents or the solvents in glues can be damaging to health.

Always follow the instructions, use and safety regulations specified by the manufacturer!

ALS 20x 256

GB

5

Image 9
Contents 204/206 256 Page Product description Please noteAfter operation Before operationOperation Operational failuresValidity and binding effect of this manual General NotesButton symbols Signs and symbolsIllustrations and descriptions ParametersInformation and qualifications Safety InstructionsFollow the instructions Keep the product information at handOperational safety of the unit Proper usageProtection against injuries by electrical current Protection against injuries by chemicals Protection against injuries by mechanical actionDue diligence of the user Before beginning productionPinch point Safety notes on the unitComponents OverviewALS 20x Control panel Error LEDOperating LED LCD displayConnections on the back of the device Connection arrangementLabel Label H Sensor connectionsMode of operation Characteristics Technical specificationsPower supply LabelsInterfaces ElectronicsInternal Interfaces Status messages, test functions, product profilesEnvironmental conditions DimensionsIntegration CertificatesDesign models Right-handed versionLeft-handed version External control panel OptionsFixed dispensing edge Swivelling dispensing edgeAdjustable dispensing edge holder Pneumatic dispensing edgeShape dispensing edge Printer Outer Diameter control sensorApplicator Applicator interfaceOperating Modes Dispensing modeDispensing speed Online settingsConfiguration mode Function of the double-arrow buttonMenus German FunctionsFunction overview Function DescriptionsSERVICE/DIAGNOS Service Data Machine Setup menu Label Setup menuService Data menu Electrical Connections Power supply connectionChecking the power supply setting Connecting the power cableSwitch setting Permissible mains voltage C D Connecting sensorsPrerequisites ALSInserting a label roll Inserting Label MaterialRemoving spent backing paper Removing glue residueThreading guide Threading the label rollThreading the label roll at the dispensing edge Fastening the label roll to the rewinder Threading the label roll onto the drive rollerMechanical Settings Adjusting the unwinder’s core diameterPositioning the pressure roller Positioning the label sensor Turning on the unit START-UP and ShutdownStarting label dispensing Dispensing with a product sensorStopping the dispensing process Function menu settings Configuration and MonitoringLabel pitch Label stop positionDispensing speed Configuring speed adaptionLabel position on the product 256Material tear Monitoring functionsMissing labels Material endWhat are product profiles? Using Product ProfilesLoading a product profile Storing a product profileDeleting a product profile Call the Machine Setup Del. prod.profil functionMaintenance and Cleaning Active fuse Mains voltage Switch settingReplacing fuses Cleaning agents Regular maintenance Removing paper debrisRenewal of the dust filter liner ALS Reporting errors Error MessagesList of error messages Status Status text CauseALS 20x Set to Dhcp Interface Para EU Declaration of Conformity Avery Dennison Deutschland GmbH