Avery 256, 204, 206 manual Label position on the product

Page 47

CONTENTS

ALS

20x

4.2 CONFIGURATION AND MONITORING

256

 

 

GB

Label position on the product

 

Prerequisites:

 

– The label length must be specified.

 

– The label stop position must be set.

 

Configuration in dispensing mode:

 

Use the two right buttons to set the start offset (see

 

“Online settings” on page 22).

 

Or use the function menu settings:

 

Call the LABEL SETUP > Start Offset function and set the

A

start offset.

 

– The label should be flush with the front edge of the

 

product:

[47] Distance between the product sensor (left) and the

Enter the distance between the product sensor and

dispensing edge (right).

the dispensing edge [47A].

 

–The label should be stuck at a distance from the front edge of the product:

Increase the start offset by the distance [48A] to the product’s front edge.

A

[48] Distance (A) between the label and the product’s front

43

Page 46 Page 48
Image 47
Page 46 Page 48
Contents 204/206 256 Page Product description Please noteOperational failures Before operationAfter operation OperationValidity and binding effect of this manual General NotesParameters Signs and symbolsButton symbols Illustrations and descriptionsKeep the product information at hand Safety InstructionsInformation and qualifications Follow the instructionsProtection against injuries by electrical current Operational safety of the unitProper usage Protection against injuries by chemicals Protection against injuries by mechanical actionDue diligence of the user Before beginning productionPinch point Safety notes on the unitComponents OverviewALS 20x LCD display Error LEDControl panel Operating LEDConnections on the back of the device Connection arrangementLabel Label H Sensor connectionsMode of operation Labels Technical specificationsCharacteristics Power supplyStatus messages, test functions, product profiles ElectronicsInterfaces Internal InterfacesCertificates DimensionsEnvironmental conditions IntegrationLeft-handed version Design modelsRight-handed version Swivelling dispensing edge OptionsExternal control panel Fixed dispensing edgeShape dispensing edge Adjustable dispensing edge holderPneumatic dispensing edge Applicator interface Outer Diameter control sensorPrinter ApplicatorOperating Modes Dispensing modeDispensing speed Online settingsMenus Configuration modeFunction of the double-arrow button German FunctionsFunction overview Function DescriptionsSERVICE/DIAGNOS Service Data Machine Setup menu Label Setup menuService Data menu Electrical Connections Power supply connectionSwitch setting Permissible mains voltage Checking the power supply settingConnecting the power cable C D Connecting sensorsPrerequisites ALSRemoving glue residue Inserting Label MaterialInserting a label roll Removing spent backing paperThreading guide Threading the label rollThreading the label roll at the dispensing edge Fastening the label roll to the rewinder Threading the label roll onto the drive rollerPositioning the pressure roller Mechanical SettingsAdjusting the unwinder’s core diameter Positioning the label sensor Dispensing with a product sensor START-UP and ShutdownTurning on the unit Starting label dispensingStopping the dispensing process Label stop position Configuration and MonitoringFunction menu settings Label pitchDispensing speed Configuring speed adaptionLabel position on the product 256Material end Monitoring functionsMaterial tear Missing labelsStoring a product profile Using Product ProfilesWhat are product profiles? Loading a product profileDeleting a product profile Call the Machine Setup Del. prod.profil functionReplacing fuses Maintenance and CleaningActive fuse Mains voltage Switch setting Cleaning agents Renewal of the dust filter liner ALS Regular maintenanceRemoving paper debris Status Status text Cause Error MessagesReporting errors List of error messagesALS 20x Set to Dhcp Interface Para EU Declaration of Conformity Avery Dennison Deutschland GmbH
Top Page Image Contents