CONTENTS
2.3OPERATING MODES
Online settings
The machine is in dispensing mode.
To switch to the online settings mode:
Press the 
button.
–The display shows the dispensing speed [21A] and the start offset [21C].
–The button assignments are as shown on the buttons.
–You can increase (‘+’ button) or lower
[21D].
Dispensing speed:
–Setting range:
ALS 204: [2.0…40.0] m/min
ALS 206: [2.0…30.0] m/min
–Display fix: The dispensing speed is constant.
–Display var: The dispensing speed automatically adjusts to the speed of the conveyor belt (‘speed adaption’).
Start offset:
–Setting range: [0.0…999.9] mm
–The start offset indicates the distance between the product sensor and the dispensing edge.
Dispensing manually
–To manually trigger the dispensing of individual labels:
Press the 
button.
–Dispensing speed: As specified in the setting (see above).
To switch back to dispensing mode:
Press the buttons 
+ 
.
ALS 20x 256
GB
A | B |
| C | |||||||||
|
|
| ON |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| ||||
| STATUS |
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Speed |
| Offset |
|
| |||||||
| 12.2 fix | 0.0 |
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| – + | – + |
| D | ||||||||
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
E F G H
[21]Control panel in the online settings mode
A Dispensing speed display (here: 12.2 m/min constant) B Dispense label button
C Start offset display (here: 0 mm)
D Explanation of buttons in online settings mode E Button to lower dispensing speed
F Button to increase dispensing speed G Button to lower start offset
H Button to increase start offset
22