CONTENTS
2.3OPERATING MODES
2.3.1Dispensing mode
This is the operating mode of the unit when switched on. You can carry out the functions listed below.
If text such as ‘Prof 5 xxxxxxxx’ is displayed instead of ‘ONLINE’:
–The ‘xxxxxxxx’ product profile (memory location 5) is activated.
–For more information, see the ‘Using product profiles’ section.
Stopping /Continuing the dispensing mode
Stopping the dispensing mode:
Press the 
button.
– Display:
ONLINE
Stopped:xxx
Continuing the dispensing mode:
Press the 
button.
Changing the counter reading
Set the counter reading using the MACHINE SETUP > Dispense counter function.
Starting the unit in configuration mode
To start the unit in configuration mode:
Set MACHINE SETUP >
Counting labels backwards
To count dispensed labels backwards from a starting value to zero:
Set LABEL SETUP > Stop count. mode to ‘Enabled’. Use the LABEL SETUP > Label stop quan. function to define the starting value.
ALS 20x 256
GB
ON
STATUS
Online
Labels292
– + – +
A
[20]Control panel in dispensing mode (292 labels dispensed) A Explanation of buttons in dispensing mode
21