MGE UPS Systems EX40, EX20, EX30 Connecting the Pulsar EXB battery extension modules, Option

getting started (continued)

connecting the Pulsar EXB battery extension modules

(option)

ccheck that the button 3 "" on the front of Pulsar EX is in the released position;

ccheck that the battery switch 7 on Pulsar EX and the circuit-breakers 32 on the Pulsar EXB modules are open ("O" position);

ccheck that the cable 5 really is disconnected from the AC power or, in the case of cable connection, that the AC power really has been cut;

copen the cover 9 protecting the Pulsar EX and 33 on Pulsar EXB;

cplug the battery connecting cable 35 supplied with Pulsar EXB into the connectors 9 of Pulsar EX and 33 of Pulsar EXB (see figure 6);

cin the case of an installation containing 2 battery modules, connect the second cable 35 into the connectors 34 of the first module and 33 of the second module;

c the use of connectors 33 and 34 is	Figure 6
strictly limited to connection of 1 or 2 battery
modules with Pulsar EX.
Any other connection on these connectors is
forbidden as it risks damaging the battery
and voiding the warranty;

crefer to the "operation" section for startup of Pulsar EX.

32
33	32
34	34
	33
35
9	8
	35

7

MGE UPS SYSTEMS Pulsar EX: 51032306XT/BB 31