B&K 1787B, 1786B, 1788, 1785B instruction manual

Page 35

Click here and move to zoom in/out axes or scroll axes

To set the ring buffer size

To set the limit position

		To set the X-Axes Span
To set the Y-Axes Span		To set the X-Axes Span

Vertical marker

Horizontal marker

XY Value marker

Limit range between the minimum value and maximum value.

Scroll axes mode

Zoom in/out axes mode

Zoom out

Zoom in

Save the chart as a .BMP file.

Clear all data

Resume tracking

Auto scale

Print the chart

Zoom rectangle

Image 35

Contents Page Content Protection from electric shock About your safetyQuick Reference General informationCertification Certification and WarrantyIntroduction Front Panel at a Glance Display annunciators Function keys descriptionMenu description Cal Rear Panel at a GlanceCheck the list of supplied items Connect the power cord and turn on the power supplyQuick Start Preliminary CheckoutCurrent Output Checkout Output CheckoutVoltage Output Checkout Verify the power-line voltage setting If the Power Supply Does Not Turn OnTo Adjust the Carrying Handle Verify that there is AC power to the power supplyBench-top viewing positions Carrying position To Rack Mount the InstrumentSpecifications SpecificationsMaximum input power Supplemental CharacteristicsEnvironmental Conditions Unit mmConstant Voltage Operation Front-panel OperationFront-panel Operation Overview Set Maximum voltageMAX Volt Constant Current OperationSaving and Recalling Operation Menu OperationInitiating the Output Voltage Init Volt Setting the Key SoundKEY SoundSetting the Baud RateBAUDRATE Initiating the Output stateINIT OUTSetting password for function keysKEY Lock Setting Address AddressIT-E131 Communication cable Remote Operation ModeCommunication setting Description Setting the remote control mode 20HFrame format Communication protocolSetting the output voltage 23H Setting the output state ON/OFF 21HSetting the maximum output voltage 22H Setting the communication address 25H Setting the output current 24HReading the calibration state 28H Entering the calibration mode 27HCalibrate the current value 2BH Calibrating the voltage value 29HReading calibration information 2FH Setting calibration information 2EHSave the calibration data to Eeprom 2DH Return information of command operation in power supply 12H Restore the factory default calibration data 32HEnable the local key 37H Calibration Finish calibrating ConfigurationVoltage calibration Current calibrationPV1785B1788 Software Reset to the default calibration settingsInstallation Functions of PV1785B1788 Status bar 1Configure the systemQuickly setting Setting Voltage and current4. GO/NG Test Function Program settingSave and Open Present Voltage/Current ChartChart Description Page Limited One-Year Warranty Service Information USA