American Power Conversion MX28B2400 Batt HT Alm, Batt HT Thr, 70.0 C, Batt HV Alm, Batt HV Thr

PARAMETER NAME/	DESCRIPTION	DISPLAY SCREENS /
[MENU LOCATION]		DEFAULT SETTINGS
Battery High Temperature	The output relay energized if the battery	Batt HT Alm	m+
Alarm	temperature exceeds the Battery High	Minor
Security Level {1}	Temperature threshold.
[BATT/SET-ALM]
Battery High Temperature	Battery Temperature is temperature measured at	Batt HT Thr	m+
Threshold	the battery probe. An alarm is generated if the	70.0 C
Security Level {1}	battery temperature exceeds this value.
[BATT/SET-ALM]
Battery High Voltage Alarm	The output relay energized if the DC output	Batt HV Alm	m+
Security Level {1}	voltage rises above the battery high voltage	Minor
[BATT/SET-ALM]	threshold.
Battery High Voltage Threshold	An alarm will be reported if temperature is lower	Batt HV Thr	m+
Security Level {1}	than the temperature entered.	-58.00	V
[BATT/SET-ALM]	An alarm is generated if the DC output voltage
	rises above this value.
Battery Low Temperature	The output relay energized if the Battery	Batt LT Alm	m+
Alarm	Temperature drops below the battery Low	Minor
Security Level {1}	Temperature threshold.
[BATT/SET-ALM]
Battery Low Temperature	Battery Temperature is temperature measured at	Batt LT Thr	m+
Threshold Security Level {1}	the battery probe. An alarm is generated if the	0.0 C
[BATT/SET-ALM]	battery temperature drops below this value.
Battery Low Voltage Alarm	The output relay energized if the DC output	Batt LV Alm	m+
Security Level {1}	voltage drops below the battery low voltage	Minor
[BATT/SET-ALM]	threshold.
Battery Low Voltage Threshold	An alarm is generated if the DC output voltage	Batt LV Thr	m+
Security Level {1}	drops below this value.	-44.00 V
[BATT/SET-ALM]
Battery Maximum Recharge	One of three parameters that control the DC	Batt Max Rechm+
Current	output voltage. If Battery Current surpasses the	50 A
Security Level {1}	Maximum Battery Recharge Current, the DC
[BATT/PARAM]	output voltage will be reduced (the system limits
	the charging current to this programmable value).
Battery Temperature	Battery temperature measured by the system	Batt Temp	+
{Status Only}	controller at the optional battery temperature	25.2 C
[STATUS]	sensor probe.
Circuit Breaker 1 Alias	An alternate name (alias) that can be assigned to	Cir Bkr 1	m+
Security Level {1}	a circuit breaker if desired.	-48V
[MODULES/CIRBKR/ALIAS]
•	•	•
•	•
		•
•	•
Circuit Breaker 24 Alias	An alternate name (alias) that can be assigned to	•
Security Level {1}	a circuit breaker if desired.	Cir Bkr 72	m+
[MODULES/CIRBKR/ALIAS]		-48V

MX28B1200/2400 MX28B1200/4800 –48 VDC User’s Manual Page 38