Epson TM-FX2180 manual Minimum Maximum

EPSON FX-2180 Service Manual

‰Single-sheet multi-part forms

Table 1-9. Specifications for Single-sheet Multi-part Forms

	Front Entry		Rear Entry
	Minimum	Maximum	Minimum	Maximum
Width
(inches)	3.9	16.5	3.9	16.5
(mm)	100	420	100	420
Length
(inches)	5.8	16.5	3.9	16.5
(mm)	148	420	100	420
Copies	1 original + 5 copies		1 original + 5 copies
Total
thickness
(inches)	0.0047	0.018	0.0047	0.018
(mm)	0.012	0.46	0.012	0.46
Weight
(lb)	12	15	12	15
(g/m2)	40	58	40	58
Quality	Plain or recycled paper; not		Plain or recycled paper; not
	curled, folded, or crumpled		curled, folded, or crumpled
Binding	A line of glue at the top or		A line of glue at the top of
	on one side of the form		the form

Chapter 1 Product Description

‰Envelopes

Table 1-10. Specifications for Envelopes

			Rear Entry
		Minimum		Maximum
No. 6 envelopes	Width
	(inches)		6.5
	(mm)		165
	Length
	(inches)		3.9
	(mm)		92
No. 10 envelopes	Width
	(inches)		9.5
	(mm)		241
	Length
	(inches)		4.1
	(mm)		105
Total thickness	(inches)	0.0063		0.020
	(mm)	0.16		0.52
Weight	(lb)	12		15
	(g/m2)	40		58
Quality		Bond, plain, or airmail paper; not
		curled, folded, or crumpled

Note:

‰Load envelopes using the rear (top) slot only; do not load envelopes in the front slot.

‰Insert the envelope into the printer with the flap side on top and the printable side down.

‰Before printing on envelopes, set the paper thickness lever to a minimum of position 4 or 5 and turn on the card mode by pressing the Tear Off/Bin button until both Tear Off/Bin lights are on. After you finish printing on envelopes, press the Tear Off/Bin button once to exit the card mode.

‰Use envelopes only under normal temperature and humidity conditions.

1-6