Epson TM-FX2180 manual Maintenance, Ref. No Lubrication Points Quantity Lubricant

EPSON FX-2180 Service Manual						Chapter 6 Maintenance
		Table 6-2. Lubrication Points
Ref. No.		Lubrication Points		Quantity	Lubricant
1	Cam surfaces of the 34.5 mm			2 mm width,	G-26
	spur gears			halfway
2	The platen gap adjustment			2 mm width,	G-26
	slots on the right frame			from the top
				slot to the 3rd
				slot from the
				bottom
3	The end of the shaft of the			About ½ the	G-26
	drive roller assembly and the			size of a grain
	cutout section on the left frame			of rice
4	Oil pads			Half of the pads	O-2
5	RD planetary shaft and			About ½ the	G-26
	planetary lever leaf spring			size of a grain
				of rice
6	RD housing			About ½ the	G-26
	∙	Side of shafts:	3 points	size of a grain
	∙	Inside hole:	1 point	of rice
7	5 points on the RD assembly			About ½ the	G-26
	gear teeth			size of a grain
				of rice
8	The side of the RD ratchet			About the size	G-26
	shaft			of a grain of
				rice
9	10 contact points between the			About the size	G-26
	paper guide and the release			of a grain of
	shaft			rice

Note: Apply lubricants when you are reassembling the printer. For lubrication points, see the following figures.

6-2