Epson TM-FX2180 manual Front Entry Rear Entry Bottom Entry Min Max

EPSON FX-2180 Service Manual Chapter 1 Product Description

‰Postcards

Table 1-11. Specifications for Postcards

	Front Entry			Rear Entry
	Minimum		Maximum	Minimum	Maximum
Width
(inches)	3.9		5.83	3.9	5.83
(mm)	100		148	100	148
Length
(inches)	5.83		5.83	3.9	5.83
(mm)	148		148	100	148
Thickness
(inches)		0.0087
(mm)		0.22
Weight
(lb)		51
(g/m2)		192

Note:

‰Before printing on postcards, set the paper thickness lever to position 3 or higher and turn on the card mode by pressing the Tear Off/Bin button until both Tear Off/Bin lights are on. After you finish printing on envelopes, press the Tear Off/Bin button once to exit the card mode.

‰Use postcards only under normal temperature and humidity conditions.

‰Continuous paper

Table 1-12. Specifications for Continuous Paper

	Front Entry		Rear Entry			Bottom Entry
	Min.	Max.	Min.	Max.		Min.	Max.
Width
(inches)	4	16	4	16	4		16
(mm)	101.6	406.4	101.6	406.4	101.6		406.4
Length
(inches)	4	22	4	22	4		22
(mm)	101.6	558.8	101.6	558.8	101.6		558.8
Copies*	1 original + 5		1 original + 5			1 original + 5
	copies		copies			copies
Total thickness
(inches)	0.0025	0.018	0.0025	0.018	0.0025		0.018
(mm)	0.065	0.046	0.065	0.046	0.065		0.046
Weight
(ordinary page)
(lb)	12	22	12	22	12		22
(g/m2)	52	82	52	82	52		82
Weight (one
sheet of a
multi-part form)
(lb)	12	15	12	15	12		15
(g/m2)	40	58	40	58	40		58
Quality	Plain or recycled paper, carbonless multi-part forms
Binding	Dots of glue or paper staples on both sides (front,
	bottom, or rear entry) or dots of glue on only one side
	(rear entry)

*To print 1 original + 6 copies, you must use the pull tractor along with the front or rear tractor.

1-7