Toshiba B-9700-LAN-QM-R, B-SX5T, B9700LANQMR manual COM1

Page 12

1. OUTLINE

EO10-33013B

1.5 ELECTRONICS SPECIFICATIONS

(3) Expansion I/O interface (B-SX4T: Option) Interface circuit

Input circuit

Printer	External controller, etc.
COM1
	Vcc
IN0	R
~
IN5	R
IN5

Photo-coupler

TLP521TPL521(TOSHIBA)

There are six input circuits, and each input is a current loop using a photo-coupler.

The anode of the photo-coupler is connected to common pin COM1 in each of the six circuits. Each cathode is independent. The voltage of Vcc is 24 V (max.) while the diode operating current is 16 mA.

Output circuit

Printer

~

External controller, etc.

(In the case of photo-coupler)

OUT0Vcc

~ OUT6

COM2

There are seven output circuits, and each output is an open collector. The voltage of Vcc is 24V (max.) while the operating current is 150 mA.

For other details, please refer to the Expansion I/O specifications stored in the enclosed CD- ROM or posted on the web site with the URL, http://barcode.toshibatec.co.jp.

1-10

Image 12

Contents SX4T/SX5T Series Table of Contents Printer Specifications Description of Model NumberX 4 T G S 1 0 Q Q R Appearance and Dimensions Approximate Dimensions ApproximateFront View/Rear View Operation PanelBasic Specifications JAN8, EAN8, JAN13, EAN13, UPC-A, UPC-EMagnification of bar code Outline Electronics Specifications Specification of the MAIN4 PC Board Receive data line 1MB COM1 TCP/IP Home Position Strip Sensor Tr Print Head Print Head Media SX4TLabel Non Print Area Ribbon Care and Handling of the Media and Ribbon General Description Available Rfid TagLocation of Rfid Tag 40 mm + 5mm Media feeding direction Poor printing may occur in this area due to bump Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-EU/AU-R 35 mm ±3 mm Short-pitch Tag Revision Date Apr Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-US-R 35 mm ±3 mm Supply Specifications Rafsec Short Dipole2 Tag Supply Specifications Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-CN-R 38 mm ±3 mm Short-pitch Tag Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Optional KIT Strip Module B-9904-H-QM/QM-R option for the B-SX4T Pcmcia Interface Board B-9700-PCM-QM/QM-R BUILT-IN LAN Interface Board B-9700-LAN-QM/QM-RUSB Interface Board B-9700-USB-QM/QM-R Specification Rfid Module B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R10RFID Module B-SX704-RFID-U2-EU/AU/US/CN-R Applicable modelDSB-ASK Wireless LAN Board B-9700-WLAN-QM-R „ Hardware Specification„ Country code Country Code Table„ MAC address „ LED „ Precautions „ Handling Precautions for B-9700-WLAN-QM„ Certification