3. OPTIONAL KIT
3.5 PCMCIA INTERFACE BOARD:
3.5 PCMCIA INTERFACE BOARD: B-9700-PCM-QM/QM-R
The PCMCIA Interface board allows use of the following ATA card, LAN card, or flash memory card when connected to the CPU PC board.
• Number of slots: Type II slot - 2 slots
Type | Maker | Description | Remarks | ||||||
ATA Card | San Disk, | A card conforming to the PC card | |||||||
Hitachi | ATA standard | ||||||||
|
| ||||||||
LAN Card | 3 COM | 3CCE589ET Series | Install into the slot (2) only. | ||||||
(This card installed into the | |||||||||
|
|
|
|
|
|
|
| slot (1) will not work.) | |
| Maxell |
|
|
|
|
| |||
|
| CC |
| ||||||
|
|
|
|
|
|
|
|
| |
| Maxell | DC |
| Read/Write | |||||
|
|
|
| ||||||
| Centennial | ||||||||
|
| ||||||||
| Technologies INC. |
| |||||||
|
|
|
|
|
|
|
| ||
Flash Memory | INTEL | IMC004FLSA |
| ||||||
Simple TECNOLOGY |
|
| |||||||
Card (4 MB) | Mitsubishi |
| |||||||
| PC Card KING MAX |
| |||||||
| Centennial | Read (See NOTE.) | |||||||
| Technologies Inc. | ||||||||
|
|
|
|
|
|
|
| ||
| PC Card |
| |||||||
| Mitsubishi |
| |||||||
Flash Memory | Maxell |
|
|
|
|
| |||
| AA |
|
| ||||||
Card (1 MB) |
|
|
|
|
|
|
|
| |
Mitsubishi |
|
NOTE: Reading a
3.6EXPANSION I/O INTERFACE BOARD:
This interface board is used to connect the printer to external devices, such as a labeler. The input/output signals from the connected external devices can control label feeding or printing and indicate the print status.
3.7 BUILT-IN LAN INTERFACE BOARD: B-9700-LAN-QM/QM-R
This board enables the printer to connect to the host by means of Local Area Network.
•Supporting 10/100M bps
•Internal 32 bit wide data pass (for the packet buffer memory)
•Conforming to IEEE 802.3/802.3u, 100
•Auto negotiation: 10/100M bps, Full/Half Duplex
3.8 USB INTERFACE BOARD: B-9700-USB-QM/QM-R
Installing this board enables a connection to a PC which has a USB interface.
•Conforming to USB 1.1
•Supporting
•Supporting the two types of data transmission types, Control transmission and Bulk transmission.
3- 3