Toshiba B9700LANQMR, B-9700-LAN-QM-R, B-SX5T manual Dsb-Ask

Page 53

3. OPTIONAL KIT

EO10-33013B (Revision Date: May 22,2009)

3.10 RFID MODULE: B-SX704-RFID-U2-EU/AU/US-R

To use this device, printer firmware V4.7 or greater is required. Upgrade the firmware to V4.5 or greater, if necessary. For the downloading procedure, refer to Section 7 PROGRAM DOWN LOAD. Note that a RAM clear needs to be performed after downloading, so print out the maintenance counter and parameter settings prior to downloading. After performing a RAM clear, restore the printer parameter settings to the former states.

Destination Code Setting should be performed in the system mode of the printer according to the destination.

The countries where the use of this device is allowed are as follows:

Model Name

Setting

Frequency Band

Applicable Countries

B-SX704-RFID–U2-US-R

US

UHF 902.75 to 927.5MHz

U.S.A., Canada

AU

UHF 918.25 to 925.75 MHz

Australia

(Serial Number:

KR

UHF 910.4 to 913.6 MHz

South Korea

2809Axxxxxx or later)

TW

UHF 922.25 to 927.25 MHz

Taiwan

 

Specification:

The specification of the B-SX704-RFID-U2-EU/AU/US/CN-R is as follows.

Item

Module

Applicable standard

Frequency range

Center frequency

Output power (ERP)

Output power (Conducted)

Modulation method (RW→Tag)

Modulation method (Tag→RW)

Transmission speed (RW→Tag)

Transmission speed (Tag→RW)

Encoding (RW→Tag)

Encoding (Tag→RW)

Number of channels

Duty Cycle

Carrier sense feature

Environmental standard

Available RFID tags

Specification EU: TOSHIBA TEC TRW-EUM-01 for Europe AU: TOSHIBA TEC TRW-AUM-01 for Australia US (Serial Number 2808Yxxxxxx and earlier):

TOSHIBA TEC TRW-USM-01 for U.S.A. and Canada US (Serial Number 2809Axxxxxx or earlier):

TOSHIBA TEC TRW-USM-01 for U.S.A., Canada, Australia, South Korea, Taiwan

CN: TOSHIBA TEC TRW-CNM-01 for CHina

EU: ETSI EN 300 220

AU: C-Tick AS.NZS 428(2003); A1

US: FCC Part15 Subpart C

TW: NCC (National Communications Commission)

LP2002 Low-power Radio-frequency Devices Technical Specifications KR: KCC (Korea Communications Commission)

Radio Certification Standard No. 2008-26 Article 98

EU: 869.7 - 870.0MHz

AU: 918.25 – 925.75MHz

US: 902.75 – 927.5MHz

KR: 910.4 – 913.6 MHz

TW: 922.25 – 927.25 MHz

CN: 920.625 – 924.375MHz

EU: 869.85MHz

AU: 922MHz

US: 915.125MHz

KR: 912MHz

TW: 924.75MHz

CN: 922.5MHz

EU: Max. 5mW (Power class 7a)

10 - 100mW

DSB-ASK

Back scatter ASK 40kbps 40kbps

PIE

FM0

EU: 1

AU: 31 (Frequency Hopping)

US: 99 (Frequency Hopping)

TW: 21 (Frequency Hopping)

KR: 17 (Frequency Hopping)

CN: 16 (Frequency Hopping)

EU: Max. 100% (Class 4) None

RoHS directive

EPC C1 Gen2, ISO-18000-6C

3- 6

Image 53
Contents SX4T/SX5T Series Table of Contents X 4 T G S 1 0 Q Q R Printer SpecificationsDescription of Model Number Dimensions Approximate Appearance and Dimensions ApproximateFront View/Rear View Operation PanelJAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E Basic SpecificationsMagnification of bar code Outline Electronics Specifications Specification of the MAIN4 PC Board Receive data line 1MB COM1 TCP/IP Home Position Strip Sensor Tr Print Head Print Head SX4T MediaLabel Non Print Area Ribbon Care and Handling of the Media and Ribbon Available Rfid Tag General DescriptionLocation of Rfid Tag 40 mm + 5mm Media feeding direction Poor printing may occur in this area due to bump Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-EU/AU-R 35 mm ±3 mm Short-pitch Tag Revision Date Apr Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-US-R 35 mm ±3 mm Supply Specifications Rafsec Short Dipole2 Tag Supply Specifications Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-CN-R 38 mm ±3 mm Short-pitch Tag Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Optional KIT Strip Module B-9904-H-QM/QM-R option for the B-SX4T USB Interface Board B-9700-USB-QM/QM-R Pcmcia Interface Board B-9700-PCM-QM/QM-RBUILT-IN LAN Interface Board B-9700-LAN-QM/QM-R Rfid Module B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R SpecificationApplicable model 10RFID Module B-SX704-RFID-U2-EU/AU/US/CN-RDSB-ASK „ Hardware Specification Wireless LAN Board B-9700-WLAN-QM-R„ MAC address „ Country codeCountry Code Table „ LED „ Certification „ Precautions„ Handling Precautions for B-9700-WLAN-QM