Toshiba B-SX5T, B-9700-LAN-QM-R, B9700LANQMR Strip Module B-9904-H-QM/QM-R option for the B-SX4T

Page 49

3. OPTIONAL KIT

EO10-33013B

3.1 CUTTER MODULE: B-4205-QM/QM-R (Swing Cutter), B-8204-QM/QM-R (Rotary Cutter)

3.1CUTTER MODULE: B-4205-QM/QM-R (Swing Cutter), B-8204-QM/QM-R (Rotary Cutter)

This compact cutter module uses a built-in swing/rotary cutter. The specification is provided below:

Cutter Type

 

 

 

 

 

 

B-4205-QM/QM-R

 

 

 

 

 

B-8204-QM/QM-R

Cut method

 

 

 

 

 

 

Stop and cut

 

 

 

 

 

Rotary cut

Media width

 

 

B-SX4T

 

 

 

30.0 mm − 112.0 mm

 

 

 

 

 

B-SX5T

30.0 mm − 140.0 mm

 

 

 

 

30.0 mm − 112.0 mm

 

 

 

 

B-SX4T

Tag

25.4 mm − 1500.0 mm

 

 

3”/sec., 6”/sec.: 30.0 mm − 1500.0 mm

Media pitch

 

Label

38.0 mm − 1500.0 mm

 

 

3”/sec., 6”/sec.: 38.0 mm − 1500.0 mm

 

 

 

 

 

B-SX5T

Tag

25.4 mm − 1500.0 mm

 

 

3”/sec., 5”/sec.: 30.0 mm − 1500.0 mm

 

 

 

 

 

 

8”/sec.: 38.0 mm − 1500.0 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Label

38.0 mm − 1500.0 mm

 

 

 

38.0 mm − 1500.0 mm

Media thickness

 

 

Tag

 

 

 

 

 

0.15 − 0.29 mm

 

 

Label

 

 

 

 

0.13 − 0.17 mm

 

 

 

 

 

 

 

 

 

Cutter life

 

 

 

 

 

 

 

 

300000 cuts (0.274-mm thick tag paper)

 

 

 

 

 

 

 

 

1000000 cuts (0.160-mm thick tag paper)

 

 

 

 

 

 

 

 

 

 

 

Home position detection

 

 

 

 

Micro switch

 

 

 

 

 

Photo coupler

 

 

 

Swing: 32.8 mm

 

Print Head

 

 

 

 

 

 

 

 

 

 

 

Rotary: 77.1 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pinch Roller

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Feed Roller

3.2 STRIP MODULE: B-9904-H-QM/QM-R (option for the B-SX4T)

This strip module consists of the take-up block and the strip block. Installing the strip module enables the printer to not only remove labels from the backing paper, but wind the tag paper or label with backing paper onto the take-up spool by using the rewinder guide plate. The rewind full sensor is provided to detect the overflow if the wound tag paper or label exceeds the specified amount is provide.

3.3 RIBBON SAVING MODULE: B-9904-R-QM (option for the B-SX4T)

By moving the print head up and down with a solenoid, the ribbon saving module saves loss of the ribbon as far as possible. It is small enough to be put into the print block.

3.4RIBBON SAVING MODULE: B-9904-R2-QM/QM-R (option for the B- SX4T)

This ribbon saving module uses the solenoid with stronger pull force, which improves the ribbon saving function. It is necessary to upgrade the firmware to V1.2A or greater to use this module.

3- 2

Page 48 Page 50
Image 49
Page 48 Page 50
Contents SX4T/SX5T Series Table of Contents Description of Model Number Printer SpecificationsX 4 T G S 1 0 Q Q R Dimensions Approximate Appearance and Dimensions ApproximateFront View/Rear View Operation PanelJAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E Basic SpecificationsMagnification of bar code Outline Electronics Specifications Specification of the MAIN4 PC Board Receive data line 1MB COM1 TCP/IP Home Position Strip Sensor Tr Print Head Print Head SX4T MediaLabel Non Print Area Ribbon Care and Handling of the Media and Ribbon Available Rfid Tag General DescriptionLocation of Rfid Tag 40 mm + 5mm Media feeding direction Poor printing may occur in this area due to bump Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-EU/AU-R 35 mm ±3 mm Short-pitch Tag Revision Date Apr Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-US-R 35 mm ±3 mm Supply Specifications Rafsec Short Dipole2 Tag Supply Specifications Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-CN-R 38 mm ±3 mm Short-pitch Tag Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Optional KIT Strip Module B-9904-H-QM/QM-R option for the B-SX4T BUILT-IN LAN Interface Board B-9700-LAN-QM/QM-R Pcmcia Interface Board B-9700-PCM-QM/QM-RUSB Interface Board B-9700-USB-QM/QM-R Rfid Module B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R SpecificationApplicable model 10RFID Module B-SX704-RFID-U2-EU/AU/US/CN-RDSB-ASK „ Hardware Specification Wireless LAN Board B-9700-WLAN-QM-RCountry Code Table „ Country code„ MAC address „ LED „ Handling Precautions for B-9700-WLAN-QM „ Precautions„ Certification
Top Page Image Contents