Toshiba B-SX5T, B-9700-LAN-QM-R, B9700LANQMR „ Country code, Country Code Table, „ MAC address

3. OPTIONAL KIT

EO10-33013B

(Revision Date: Apr. 24, 2008)

3.11 Wireless LAN Board: B-9700-WLAN-QM-R

„Country code

As available frequency bands are different from country to country, be sure to set a country code before installing a wireless LAN module in a user’s printer. Also, ask an end user to confirm a country code. Use of a wireless LAN module with a wrong country code could violate each country’s Laws and Regulations for Radio Equipment, and violators could be subject to penalties. The country code cannot be changed through the Web browser, but TELNET.

<How to set a country code using TELNET>

CAUTION! The following information must not be disclosed to users. (Internal use only)

(1)Disconnect the LAN cable connected to the printer, connect the printer to a host PC with a straight LAN cable via a relay connector.

When using a hub in place of a relay connector, use a cross cable or

(2)Open the MS-DOS prompt, type in “telnet 192.168.10.21” (default IP address).

(3)Enter a password, “tecbcp”, to log in.

(4)From the top menu, change a country code using the following command.

=>ctryXX (XX=new country code. See Country Code Table.)

(5)The new country code will become effective by turning the printer off and on again.

(6)A country code can be checked by typing “=>ctry” on the telnet console.

Country Code Table

Country	Country name	Country	Country name	Country	Country name
code		code		code
US	U.S.A./Canada	GR	Greece	IE	Ireland
FR	France	SE	Sweden	GB	U.K.
PT	Portugal	HU	Hungary	AU	Australia
NO	Norway	BE	Belgium	FI	Finland
DE	Germany	IT	Italy	LU	Luxembourg
ES	Spain	NL	Netherlands	CH	Switzerland
IS	Iceland	LI	Liechtenstein	NZ	New Zealand
AT	Austria	DK	Denmark

„MAC address

MAC address of the Wireless LAN module will be necessary when setting the MAC address filtering function of an access point. As it is printed on the top of the wired LAN connector on the Wireless LAN Board, write down it on Installation Manual before mounting the covers so that an end user can know the MAC address.

MAC Address

12-digit code printed on the right side of “W” is MAC address.

3- 8