Toshiba B-SX5T, B-9700-LAN-QM-R, B9700LANQMR manual 38 mm ±3 mm

Page 43

2. SUPPLY SPECIFICATIONS

EO10-33013B

(Revision Date: May 22, 2009)

2.7 SPECIFICATION OF RFID TAG (for B-SX704-RFID-U2-CN -R)

(1) Omron Wave tag

It is recommended to locate the vertical center of an RFID tag at 38 mm ± 3 mm from a leading edge of a label and align the horizontal center with the horizontal center of the label.

38 mm ±3 mm

Media feed direction

[Printer settings for use of this tag]

In the printer system mode, set the RFID-related parameters as follows:

Q value: 2, WT AGC (AGC threshold for data write): 10, WT MIN AGC (AGC threshold lower limit for

retry): 10

As the AGC value of this tag is high, the antenna may be able to communicate with non-target tags. To prevent interferences from non-target tags, a target tag is identified by measuring the AGC of the tags within the read range. A tag of which AGC is equal to or higher than the specified threshold (10) is considered to be positioned just above the antenna (=target tag), and a data write is performed on it. When the AGC is less than the threshold, a data write is not performed on such tags.

2-27

Image 43

Contents SX4T/SX5T Series Table of Contents Description of Model Number Printer SpecificationsX 4 T G S 1 0 Q Q R Operation Panel Appearance and Dimensions ApproximateDimensions Approximate Front View/Rear ViewJAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E Basic SpecificationsMagnification of bar code Outline Electronics Specifications Specification of the MAIN4 PC Board Receive data line 1MB COM1 TCP/IP Home Position Strip Sensor Tr Print Head Print Head SX4T MediaLabel Non Print Area Ribbon Care and Handling of the Media and Ribbon Available Rfid Tag General DescriptionLocation of Rfid Tag 40 mm + 5mm Media feeding direction Poor printing may occur in this area due to bump Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-EU/AU-R 35 mm ±3 mm Short-pitch Tag Revision Date Apr Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-US-R 35 mm ±3 mm Supply Specifications Rafsec Short Dipole2 Tag Supply Specifications Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-CN-R 38 mm ±3 mm Short-pitch Tag Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Optional KIT Strip Module B-9904-H-QM/QM-R option for the B-SX4T BUILT-IN LAN Interface Board B-9700-LAN-QM/QM-R Pcmcia Interface Board B-9700-PCM-QM/QM-RUSB Interface Board B-9700-USB-QM/QM-R Rfid Module B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R SpecificationApplicable model 10RFID Module B-SX704-RFID-U2-EU/AU/US/CN-RDSB-ASK „ Hardware Specification Wireless LAN Board B-9700-WLAN-QM-RCountry Code Table „ Country code„ MAC address „ LED „ Handling Precautions for B-9700-WLAN-QM „ Precautions„ Certification