Tcp/Ip

1. OUTLINE

EO10-33013B

1.5 ELECTRONICS SPECIFICATIONS

(4) USB
c Standard:	Conforming to Rev. 1.1
d Transfer type:	Control transfer, Bulk transfer
e Transfer rate:	Full speed (12M bps)

(5) Network interface (LAN, PCMCIA)

cConstitution:• PCMCIA board + LAN card

	• 10 Base-T or 100 Base-TX LAN board
d Protocol:	TCP/IP

eNetwork specifications: • LPR server function

•WEB printer function

•Socket communication function

•FTP server function

•E-mail function

4)Sensor/switch

(1)Head up sensor (Transmissive sensor)

This sensor, located on the left front of the printer inside as viewed from the media outlet, detects whether the print head is in position or not. When the head lever is turned to the Free position, the arm on the edge of the head lever shaft turns the sensor on.

(2)Head block position switch (Transmissive sensor)

This sensor, located on the left side of the print head block, detects whether the print head block is in position or not. According to the position of the print head block, the arm on it turns the sensor on/off.

(3)Media sensor

This sensor is comprised of the black mark sensor and feed gap sensor. It is positioned 92.1 mm from the platen.

The sensor position is adjustable according to the black mark position. It can be manually moved from the center to the left edge of media.

Black mark sensor (Reflective sensor)

This sensor detects the difference of potential between the black mark and tag paper to find the print position of the tag paper.

Side detection (max.)

Center detection

	Center
23 mm	70 mm
	Tag Paper
	Black Mark
	Feed Gap Sensor
	Black Mark Sensor

Main Frame	Side Frame

Center

93 mm

Tag Paper

Black Mark

Feed Gap Sensor

Black Mark Sensor

Main Frame

Side Frame

1-11

1. OUTLINE