Toshiba B-9700-LAN-QM-R, B-SX5T, B9700LANQMR manual Optional KIT

3. OPTIONAL KIT

EO10-33013B (Revision Date: May 22, 2009)

3. OPTIONAL KIT

3. OPTIONAL KIT

		Applicable Model
Option Name	Type	B-SX4T/5T-	B-SX4T/5T-QM-R		Use
		QQ/QP
Swing cutter	B-4205-QM	O	X	This cutter module uses a swing or rotary
module				cutter. It cuts backing paper of labels and tag
	B-4205-QM-R	X	O
				paper automatically in “Stop and cut” mode.
Rotary cutter	B-8204-QM	O	X
module	B-8204-QM-R	X	O
	B-9904-H-QM	O	X	This strip module strips the label from the
Strip module				backing paper with the take-up block and strip
				block. When the rewinder guide plate is
(B-SX4T only)
	B-9904-H-QM-R	X	O	attached, the tag paper and label with backing
				paper are wound.
Ribbon saving	B-9904-R/R2-QM	O	X	The ribbon saving module moves the print
				head up and down by using a solenoid to save
module
				the ribbon loss as far as possible.
(B-SX4T only)	B-9904-R2-QM-R	X	O
	B-9700-PCM-QM	O	X	This board enables use of the following
				PCMCIA cards.
PCMCIA				LAN card: 3 COM EtherLink® III
				(recommended)
interface board
	B-9700-PCM-QM-R	X	O	ATA card: Conforming to PC card ATA
				standard
				Flash memory card: 1MB and 4MB card
Expansion I/O	B-7704-IO-QM	O	X	Installing this board allows connection to
				external devices.
interface board
(B-SX4T only)	B-7704-IO-QM-R	X	O
Built-in LAN	B-9700-LAN-QM	O	X	This board enables the printer to be used in a
interface board	B-9700-LAN-QM-R	X	O	LAN network.
USB interface	B-9700-USB-QM	O	X	Installing this board enables a connection with
board	B-9700-USB-QM-R	X	O	a PC which has a USB interface.
	B-9704-RFID-U1-US			Installing this module enables read and write
	B-9704-RFID-U1-EU	O	X	of RFID tags.
	B-9704-RFID-H1-QM			Applicable frequency band differs depending
	B-9704-RFID-H1-QM-R	O	O	on the module types:
	B-9704-RFID-U1-EU-R	X	O	U1-US:	UHF, 902MHz to 928MHz
				U1-EU/EU-R: UHF, 869.5MHz
RFID module				H1-QM/QM-R: HF, 13.56MHz
				U2-EU-R: UHF, 869.7-870.0MHz
	B-SX704-RFID-U2-			U2-AU-R: UHF, 918.25-925.75MHz
		X	O	U2-US-R (US): UHF, 902.75 to 927.5MHz
	EU/AU/US/CN-R
					(AU): UHF, 918.25 to 925.75MHz
					(TW): UHF, 922.25 to 927.25MHz
					(KR): UHF, 910.4 to 913.6MHz
				U2-CN-R: UHF, 920.625-924.375MHz
Fanfold Paper	B-4905-FF-QM	O	X	This is a paper guide exclusively used for
				fanfold paper. Attaching it in place of the
Guide	B-4905-FF-QM-R	O	O	standard paper guide allows the printer to
				print on fanfold paper.
Wireless LAN	B-9700-WLAN-QM-R	X	O	Installing this PC board allows a
Module				communication by wireless LAN.

O: Installable

X: Not installable

NOTE: To purchase the optional kits, please contact the TOSHIBA TEC Head Quarters.

3- 1