Toshiba B-SX5T, B-9700-LAN-QM-R, B9700LANQMR manual Print Head

Page 16

1. OUTLINE

EO10-33013B

1.5 ELECTRONICS SPECIFICATIONS

(7) Rewind full sensor (Transmissive sensor)

This sensor detects that the built-in rewinder is full when winding backing paper or printed media onto the take-up spool. It is positioned at 316.4 mm (Tr side) and 272 mm (LED side) from the platen. A rewinder full status is detected when the backing paper blocks the light from the LED.

Print Head

Pinch Roller

Take-up Spool

Platen

Rewind Full Sensor (Tr)

Backing Paper

Rewind Full Sensor (LED)
272 mm	44.4 mm

(8) Cutter home position switch (micro switch) for Swing Cutter

A cam positioned at the end of the cutter motor arm turns the micro switch on/off in accordance with the cutter motion cycle (one rotation). The micro switch status indicates if the cutter is in the home position.

1-14

Image 16

Contents SX4T/SX5T Series Table of Contents Description of Model Number Printer SpecificationsX 4 T G S 1 0 Q Q R Appearance and Dimensions Approximate Dimensions ApproximateFront View/Rear View Operation PanelBasic Specifications JAN8, EAN8, JAN13, EAN13, UPC-A, UPC-EMagnification of bar code Outline Electronics Specifications Specification of the MAIN4 PC Board Receive data line 1MB COM1 TCP/IP Home Position Strip Sensor Tr Print Head Print Head Media SX4TLabel Non Print Area Ribbon Care and Handling of the Media and Ribbon General Description Available Rfid TagLocation of Rfid Tag 40 mm + 5mm Media feeding direction Poor printing may occur in this area due to bump Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-EU/AU-R 35 mm ±3 mm Short-pitch Tag Revision Date Apr Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-US-R 35 mm ±3 mm Supply Specifications Rafsec Short Dipole2 Tag Supply Specifications Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-CN-R 38 mm ±3 mm Short-pitch Tag Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Optional KIT Strip Module B-9904-H-QM/QM-R option for the B-SX4T BUILT-IN LAN Interface Board B-9700-LAN-QM/QM-R Pcmcia Interface Board B-9700-PCM-QM/QM-RUSB Interface Board B-9700-USB-QM/QM-R Specification Rfid Module B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R10RFID Module B-SX704-RFID-U2-EU/AU/US/CN-R Applicable modelDSB-ASK Wireless LAN Board B-9700-WLAN-QM-R „ Hardware SpecificationCountry Code Table „ Country code„ MAC address „ LED „ Handling Precautions for B-9700-WLAN-QM „ Precautions„ Certification