Toshiba B9700LANQMR, B-9700-LAN-QM-R, B-SX5T manual Home Position

1. OUTLINE

EO10-33013B

1.5 ELECTRONICS SPECIFICATIONS

„Feed gap sensor (Transmissive sensor)

This sensor detects the difference in potential between the backing paper and the label to find the print position of the label. The feed gap sensor is located at 8 mm to the right of the black mark sensor.

Side detection (max.)

Center of Label	Home Position
78.5 mm
	8 mm
	Label
22.5 mm	Backing Paper

Feed Gap Sensor
Black Mark Sensor
Main Frame	Side Frame

Center detection

Center of Label	Home Position
		8 mm

			Label
	101 mm		Backing Paper
			Feed Gap Sensor
Main Frame
				Side Fram
		Black Mark Sensor

(4) Ribbon end sensor (Reflective sensor)

When printing in thermal transfer mode (using the ribbon), this sensor detects the difference in potential between the ribbon and the ribbon end to indicate the ribbon end. It is positioned at 48.28 mm from the platen.

Ribbon

48.28 mm

Print Head Ribbon End Sensor

Pinch Roller

Feed Roller

1-12