Toshiba B9700LANQMR, B-9700-LAN-QM-R, B-SX5T manual Ribbon

2. SUPPLY SPECIFICATIONS

EO10-33013B

2.2 RIBBON

2.2 RIBBON

No. Item

1Shape

2Width B-SX4T B-SX5T

3Max. length

4Max. OD

5Back treatment

6Core Material Shape

7Leader tape

8End tape

9Winding method

Specification

Spool type

41 to 112 mm

41 to 134 mm

600m

ø 90 mm Coated Cardboard

See the following figures.

Polyester film (Opaque), 300 ± 5 mm long Polyester film (Opaque), 250 ± 5 mm long The ink side faces outside of ribbon winding

NOTES: 1. To ensure print quality and print head life use only TOSHIBA TEC specified ribbons.

2.To avoid ribbon wrinkles use a ribbon which is wider than the media by 5 mm or more. However, too much difference in width between the two may cause wrinkles.

3.When using a 112 mm wide media, be sure to use a 108 mm wide ribbon. Use of other ribbons may cause ribbon wrinkles.

4.When using a 134 mm wide media, be sure to use a 130 mm wide ribbon. Use of other ribbons may cause ribbon wrinkles.

[B-SX4T]

	Ribbon width	41 mm	50 mm	68 mm		84 mm	112 mm (NOTE 3)
	Proper media width	30 to 36 mm	36 to 45 mm	45 to 63mm	63 to 79 mm		71 to 112mm
[B-SX5T]
	Ribbon width	41 mm	50 mm	68 mm		102 mm	134 mm (NOTE 4)
	Proper media width	30 to 36 mm	36 to 45 mm	45 to 63mm	63 to 97 mm		97 to 140 mm
					25.7 ±0.2 mm

B-SX4T: 41 – 112 mm

B-SX5T: 41 – 134 mm

NOTE: When purchasing ribbon locally, they must meet the above size. There may be TOSHIBA TEC- approved ribbons which do not fall within the above size, however, they have no functional problem.

2- 4