Toshiba B-SX5T, B-9700-LAN-QM-R, B9700LANQMR manual Print quality on bumps is not guaranteed

Page 31

2. SUPPLY SPECIFICATIONS

EO10-33013B

(Revision Date: Apr. 24, 2008)

2.5 SPECIFICATION OF RFID TAG (for B-SX704-RFID-U2-EU/AU -R)

7) Printing on Bump (Chip/Antenna) Area

Embedding RFID tags in labels creates bumps in a chip/antenna area in the labels, causing incomplete printing.

Especially, in the areas 5 mm from and left and right sides of the RFID-tag embedded area shown in the figure below, uneven printing or incomplete printing can occur easily.

* The degree of poor printing quality differs depending on height of a chip/antenna used.

RFID tag embedded area

Print quality on the IC chip is not guaranteed.

Print quality on bumps is not guaranteed.

Print quality on the sides of RFID tag is not guaranteed.

Media feed direction

5mm

Print quality on bumps is not guaranteed.

5mm

8) Ambient temperature

Low operating temperature deteriorates wireless performance, under which conditions writing data on an RFID tag may fail.

9) Strip issue

Stripping performance in strip issue mode depends on the type of glue, tag, and backing paper. For some RFID supplies used, an issue may not be performed properly in strip issue mode.

2-15

Image 31

Contents SX4T/SX5T Series Table of Contents Description of Model Number Printer SpecificationsX 4 T G S 1 0 Q Q R Operation Panel Appearance and Dimensions ApproximateDimensions Approximate Front View/Rear ViewJAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E Basic SpecificationsMagnification of bar code Outline Electronics Specifications Specification of the MAIN4 PC Board Receive data line 1MB COM1 TCP/IP Home Position Strip Sensor Tr Print Head Print Head SX4T MediaLabel Non Print Area Ribbon Care and Handling of the Media and Ribbon Available Rfid Tag General DescriptionLocation of Rfid Tag 40 mm + 5mm Media feeding direction Poor printing may occur in this area due to bump Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-EU/AU-R 35 mm ±3 mm Short-pitch Tag Revision Date Apr Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-US-R 35 mm ±3 mm Supply Specifications Rafsec Short Dipole2 Tag Supply Specifications Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-CN-R 38 mm ±3 mm Short-pitch Tag Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Optional KIT Strip Module B-9904-H-QM/QM-R option for the B-SX4T BUILT-IN LAN Interface Board B-9700-LAN-QM/QM-R Pcmcia Interface Board B-9700-PCM-QM/QM-RUSB Interface Board B-9700-USB-QM/QM-R Rfid Module B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R SpecificationApplicable model 10RFID Module B-SX704-RFID-U2-EU/AU/US/CN-RDSB-ASK „ Hardware Specification Wireless LAN Board B-9700-WLAN-QM-RCountry Code Table „ Country code„ MAC address „ LED „ Handling Precautions for B-9700-WLAN-QM „ Precautions„ Certification