Toshiba B9700LANQMR, B-9700-LAN-QM-R, B-SX5T manual „ Led

3. OPTIONAL KIT

EO10-33013B

(Revision Date: Apr. 24, 2008)

3.11 Wireless LAN Board: B-9700-WLAN-QM-R

NOTE: MAC address can be checked by using “arp -a” command on MS-DOS Prompt.

<Example>

The following screen shows an example of executing an arp –a command on MS-DOS Prompt. After wireless LAN board (default IP address: 192.168.10.21) is pinged, IP address and MAC address are displayed.

ARP –a command

IP Address of Host PC

Address of other (Refer to Note)

IP address of printer MAC address of printer

NOTE: As obtained IP address and MAC address are stored in the cache of the host for a certain period of time, other device’s address may be displayed.

„ LED

<Operation>

LED	Status	LAN status
LED1 (Red)	ON	Communicating
	Blink	Starting
LED 2	ON	Wired LAN is connected.
(Orange)	Blink	Communicating with the printer
	OFF	Disconnected from the printer.
LED 3	ON	In case of station mode:
(Orange)		Log in the access point.
		In case of access point mode:
		User unit is log in.
	Blink	Communicating with a device
		connected via wireless LAN.
	OFF	In case of station mode:
		Log out from the access point.
		In case of access point mode:
		User unit is log out.

3- 9