Toshiba B9700LANQMR, B-9700-LAN-QM-R, B-SX5T manual Location of Rfid Tag

Page 23

2. SUPPLY SPECIFICATIONS

EO10-33013B

(Revision Date: Apr. 24, 2008)

2.4 SPECIFICATION OF RFID TAG (for B-9704-RFID-U1-US/EU-R, H1-QM-R)

2.4.3 Location of RFID Tag

The location of an RFID tag on a label influences on the accuracy of writing data on the RFID tag.

It is impossible to define the one best location for every RFID tag on labels because the best location depends on the type of RFID tag and RFID tag antenna.

The B-SX RFID Analyze Tool (7FM001113) can evaluate the accuracy of writing data on the RFID tag. For the usage of this tool, refer to the B-SX RFID Analyze Tool Operation Specification (TAA-2195).

As a guideline, the best location for some common RFID tags is given below.

It is recommended to use the B-SX RFID Analyze Tool to check the accuracy of writing data on an RFID tag to be used, then determine a specific location of the RFID tag.

If the RFID tag cannot be placed on the best location specified, perform a forward/reverse feed before an issue using the RFID tag position adjustment command ([ESC]@[003)

(1) Alien’s EPC C1 Squiggle Tag

It is recommended to locate the vertical center of an RFID tag in the area 45mm ±5mm from a leading edge of a label and the horizontal center with the horizontal center of the label.

45 mm + 5mm

Media feeding direction

2- 7

Image 23

Contents SX4T/SX5T Series Table of Contents X 4 T G S 1 0 Q Q R Printer SpecificationsDescription of Model Number Operation Panel Appearance and Dimensions ApproximateDimensions Approximate Front View/Rear ViewJAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E Basic SpecificationsMagnification of bar code Outline Electronics Specifications Specification of the MAIN4 PC Board Receive data line 1MB COM1 TCP/IP Home Position Strip Sensor Tr Print Head Print Head SX4T MediaLabel Non Print Area Ribbon Care and Handling of the Media and Ribbon Available Rfid Tag General DescriptionLocation of Rfid Tag 40 mm + 5mm Media feeding direction Poor printing may occur in this area due to bump Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-EU/AU-R 35 mm ±3 mm Short-pitch Tag Revision Date Apr Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-US-R 35 mm ±3 mm Supply Specifications Rafsec Short Dipole2 Tag Supply Specifications Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Specification of Rfid TAG for B-SX704-RFID-U2-CN-R 38 mm ±3 mm Short-pitch Tag Print quality on bumps is not guaranteed Print Position Accuracy Improvement of Writing Accuracy Optional KIT Strip Module B-9904-H-QM/QM-R option for the B-SX4T USB Interface Board B-9700-USB-QM/QM-R Pcmcia Interface Board B-9700-PCM-QM/QM-RBUILT-IN LAN Interface Board B-9700-LAN-QM/QM-R Rfid Module B-9704-RFID-U1-US/U1-EU/U1-EU-R/H1-QM/H1-QM-R SpecificationApplicable model 10RFID Module B-SX704-RFID-U2-EU/AU/US/CN-RDSB-ASK „ Hardware Specification Wireless LAN Board B-9700-WLAN-QM-R„ MAC address „ Country codeCountry Code Table „ LED „ Certification „ Precautions„ Handling Precautions for B-9700-WLAN-QM